Overview
The Pro Comp PXA5174-7983 is a 17×9 aluminum spoke wheel from the Pro Comp 74 Series Trilogy Pro line, in satin black milled with a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -6.
This 9-inch-wide wheel has a backspacing of 4.75, and the brand describes its high offset design as meant for brake clearance on performance trucks.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore of 108
- Offset -6 with 4.75 backspacing
Installing and checking new wheels
Installing new wheels is a good point to check the whole wheel end. Inspect the hub face for rust or debris, clean the mounting surface, and make sure the wheel sits flat against it. Any buildup between the wheel and hub can change the torque reading and let the wheel move slightly under load.
After the first several drives, check lug torque again and look at the wheel for any ticking or wobble. Wheels seat more firmly once the load settles, so a torque check after a short drive is a normal step rather than a sign of a problem. Keep a note of torque values for future service.
- Clean the hub face before mounting
- Retorque lug nuts after the first drives
- Watch for ticking or wobble after mounting
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5174-7983 |
| Series | 74 Series Trilogy Pro |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
This is a universal fit wheel, so the vehicle decides the match. A six-lug hub at 5.5 with a 108 center bore is the first check, followed by clearance at the -6 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a six-lug hub measuring 5.5 across the bolt holes accepts this wheel. Test-fit the 9-inch rim with the tire mounted to confirm the caliper and suspension have room. Six lug holes on a 5.5 spacing must line up exactly with the hub, and the 108 center bore should seat on the hub pilot. The 9-inch width and -6 offset decide how the tire sits relative to the fender and brake caliper. Choose a tire width that suits the 9-inch rim and test-fit it with the wheel mounted. The 4.75 backspacing sets the inner lip position behind the mounting face, which matters for suspension room. Steering components should clear the spokes at full lock, so check that as well. The satin black milled finish does not change these fit checks. Measure the hub before ordering, and recheck clearance after any change in tire diameter or suspension height.
What’s included
One 17×9 aluminum wheel in satin black milled. Review the hardware on hand against your installation plan first.











