Overview
The Pro Comp 43 Series Sledge 20×9 wheel, part number PXA5143-2955, is a 20-inch aluminum spoke wheel that is 9 inches wide. Its bolt pattern is 5 on 150, and the finish is satin black with milled detail, named in the series as 43 Series Sledge satin black and milled.
The wheel has a 108 center bore, a 0 offset and a backspacing of 5, so the mounting face sits at the center of the width. Its low-pressure cast build carries a 2500 to 3650 lbs per wheel rating. It is universal fit, so no particular vehicle is matched to it.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 5 on 150 bolt pattern
- Center bore 108
- Offset 0 and backspacing 5
- Satin black with milled spoke detail
Before you mount a 20-inch wheel
A 20-inch wheel changes the space around the brake system more than smaller sizes do. With the wheel on the hub, look for contact between the caliper and the spokes, and check how much room remains between the tire and the fender at full steering lock. Tire choice matters as well, since the overall rolling diameter affects speedometer reading and how the tire sits in the wheel well.
Lug seat type should match the wheel’s seat design, and a milled face benefits from a clean mounting surface. Keep the hub face free of rust and debris, and check lug nut torque again after the first few drives, when the wheel face settles against the hub.
- Caliper clearance with the tire mounted
- Lug seat type matched to the wheel
- Clean hub face before mounting
- Torque check after the first trail runs
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2955 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 150 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
No vehicle list applies to this 20×9 Sledge. Match the 5 on 150 hub and 108 center bore first, then confirm the 20-inch size clears the brake caliper and the tire you plan to run.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the 5 on 150 pattern is not a common five-lug layout, measure the hub before ordering. A 20-inch wheel also needs caliper and fender clearance checked with the wheel mounted.
The 0 offset and 5 backspacing keep the face centered, and the 108 center bore suits the hub. Measure the 5 on 150 pattern before ordering.
What’s included
The package holds one 20×9 wheel in satin black with milled detail. Check the package contents against your installation before starting, and confirm you have lug nuts and center caps that suit the wheel.











