Overview
The Pro Comp PXA1069-6170 is a 16×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and an 8 on 170 bolt pattern. It is sold as one wheel with a center bore of 110 and an offset of -25.
The Vintage wheels are low-pressure cast and offered in polished, chrome or black finishes. This version has a 10-inch width and a backspacing of 4.5. Its high offset design is intended for brake clearance on performance trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum
- Holes style face
- 16-inch diameter, 10-inch width
- 8 on 170 bolt pattern
- Center bore of 110
- Offset -25 with 4.5 backspacing
Hub matching and torque
An 8 on 170 pattern is less common than five or six lug patterns, so it pays to check the hub carefully before ordering. Count the lug holes, measure the bolt circle across two opposite holes and confirm the center bore size. A matching pattern alone does not guarantee a fit, because the hub pilot and face must also seat evenly.
Torque is where many wheel problems start. Tighten lug nuts with a torque wrench in a crisscross sequence and recheck them after the first few drives. Uneven torque can warp brake rotors or loosen a wheel on the trail. Clean the hub face and studs before mounting to avoid false readings.
- Count the lug holes before ordering
- Clean the hub face and studs
- Recheck torque after the first drives
- Inspect studs for wear
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-6170 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 16 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 110 |
| Offset | -25 |
| Backspacing | 4.5 |
Vehicle fitment
No vehicle is named for this wheel, so it is a universal design rather than a fit for a specific truck or SUV. An 8 on 170 hub with a 110 center bore is required, and the -25 offset needs a clearance check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight lug holes at 170 have to line up with the hub, so confirm the pattern before buying. Test-fit the 10-inch rim with the tire to make sure the caliper and suspension clear the offset.
What’s included
One 16×10 aluminum wheel. Lug nuts and a center cap are not confirmed as supplied.
