Overview
The Pro Comp 48 Series Quick 8 20×9 wheel, part number PXA5148-298950, is a 20-inch aluminum spoke wheel that is 9 inches wide. Its bolt pattern is 8 on 180, the only eight-lug layout of this size in the series, and its finish is satin black milled.
The wheel carries a 125 center bore, a 0 offset and a backspacing of 5. The Quick 8 is built with low-pressure casting and rated for 2500 to 3650 lbs per wheel. It is a universal fit wheel with no vehicle named.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 8 on 180 bolt pattern
- Center bore 125
- Offset 0 and backspacing 5
- Satin black milled spoke finish
Eight-lug hubs and stud fit
Eight-lug wheels spread load across more studs, which suits many heavier vehicles. Stud spacing is set by the pattern, so an eight-lug wheel only seats on a matching eight-lug hub. Because eight-lug patterns differ in stud spacing, compare the exact pattern and center bore with the hub instead of relying on the lug count alone.
Stud length and seat type matter as much as the wheel. Use lug nuts that seat properly in the wheel’s holes, and check that the studs protrude enough to engage the nuts fully. Clean rust and old thread compound from the hub face before mounting, because a dirty face can allow the wheel to loosen.
- Compare stud count and spacing with the hub
- Clean the hub face and rotor contact surface
- Use the correct lug seat type
- Recheck torque after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5148-298950 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Spoke |
| Finish | Satin black milled |
| Construction | Aluminum |
| Series | 48 Series Quick 8 |
Vehicle fitment
No vehicle is named for this 8 on 180 wheel, and the fitment is universal. Confirm the eight-lug 180 hub and the 125 center bore before ordering, then check caliper clearance for the 20-inch size.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 on 180 layout is different from the 8 on 170 and 8 on 6.5 versions of this wheel, so compare the hub measurement exactly before mounting.
The 8 on 180 layout is an eight-lug pattern, and the 125 center bore must seat on the hub. The 0 offset and 5 backspacing place the face at the center, so confirm caliper clearance on this 20-inch wheel.
Satin black milled is the finish, and the 9-inch width sets the tire options to check.
What’s included
One 20×9 wheel in satin black milled. Verify that lug nuts and center caps match this eight-lug hub before fitting.











