Overview
The Pro Comp PXA5163-218247 is a 20×10 aluminum spoke wheel from the Pro Comp 63 Series Recon line, in satin black milled with an 8 on 6.5 bolt pattern. It is one wheel with a center bore of 125 and an offset of -18.
The Recon is built with low-pressure casting and rated from 2500 to 3650 lbs per wheel. The 10-inch width and 4.75 backspacing work with the -18 offset to set tire position, so those figures belong at the top of any fit check.
Key features
- Low-pressure cast aluminum
- Spoke face style
- 20-inch diameter and 10-inch width
- 8 on 6.5 bolt pattern
- Center bore of 125
- Offset -18 with 4.75 backspacing
Signs of trouble after mounting
A wheel that is seated correctly should sit flat against the hub with no visible gap. Check for uneven gaps, rubbing marks on the inner face of the spokes, or fresh scrapes on the tire sidewall after the first drive. These signs point to a fit or clearance issue that should be corrected before more driving.
Pay attention to the tire as well. Uneven wear across the tread or a bulge in the sidewall can mean the tire is rubbing or the rim width is not suited to the tire. Recheck the mount, the offset and the tire size together, since changing one often changes the others.
- Look for uneven gaps at the hub
- Check the spoke inner face for rubbing marks
- Inspect tire sidewalls after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5163-218247 |
| Series | 63 Series Recon |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. The 8 on 6.5 hub and 125 center bore are the first checks, then the -18 offset against the caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub before ordering, since the 8 on 6.5 pattern has to match exactly. A test fit with the tire mounted shows whether the rim clears the brake parts and suspension arms at full travel. On an 8 on 6.5 hub the lug holes sit on a 6.5 spacing, which is a different layout from 8 on 170 or 8 on 180, so the wheel cannot be used on a mismatched hub. Compare the -18 offset and 4.75 backspacing with the vehicle’s inner clearance before fitting tires, and recheck after any suspension or tire-size change.
What’s included
One 20×10 aluminum spoke wheel in satin black milled.











