Overview
The Pro Comp 40 Series Vertigo 20×9 wheel, part number PXA2640-298345, is a 20-inch aluminum split spoke wheel that is 9 inches wide. It uses a 6 on 5.5 bolt pattern and a gray matte graphite finish.
The wheel has a 108 center bore, a -12 offset and a backspacing of 4.5. The Vertigo line is low-pressure cast and built for performance trucks and sport utility vehicles. The negative offset places the wheel farther outward, and it is universal fit with no vehicle tied to it.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset -12 with backspacing 4.5
- Matte graphite split spoke finish
Outward fit and tire choice
A -12 offset with a 20-inch wheel pushes the mounting face outward, so the tire sits farther out from the hub. That can improve the look of the wheel but reduces the space between the tire and the fender. Tire width should be chosen with the fender and steering lock in mind, and the sidewall height should keep the overall diameter close to the original tire.
Outward mounted wheels put more leverage on the wheel bearing and the studs, so routine checks matter. Inspect the bearing for play, look at the outer lip for scrapes after curb contact, and watch for uneven tire wear on the outer shoulder. Lug nuts should be retightened after the first drives and then at regular intervals.
- Measure outer clearance at full lock
- Check bearing play when the wheel is off
- Watch the outer shoulder for uneven wear
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA2640-298345 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.5 |
| Style | Split spoke |
| Finish | Gray, matte graphite |
| Construction | Aluminum |
| Series | 40 Series Vertigo |
Vehicle fitment
The wheel is not assigned to a make, model or year, and the fitment is universal. Measure your hub for the 6 on 5.5 pattern and 108 center bore, and check the -12 offset against the fender and brake caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A negative offset on a 20-inch wheel changes how much room the tire has inside the fender. Measure the outer clearance and the caliper before the first drive.
The matte graphite finish and split spoke pattern are the visual points of this 20×9 Vertigo, while the 108 center bore and -12 offset are the fit points. Compare both with the hub and the fender before ordering.
What’s included
The package is one 20×9 wheel in gray matte graphite. Confirm you have the lug nuts and center caps your installation needs before starting.











