Overview
The Pro Comp PXA1069-7936 is a 17×9 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 6 on 135 bolt pattern. It is sold as one wheel with a center bore of 110 and an offset of -6.
Pro Comp says its alloys combine head-turning style and light weight with low-pressure casting. This wheel’s backspacing is 4.75, and the brand describes its line as built with a high offset for brake clearance on performance trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum
- Holes style face
- 17-inch diameter, 9-inch width
- 6 on 135 bolt pattern
- Center bore of 110
- Offset -6 with 4.75 backspacing
Clearance and fitment checks
Hub fit is the first check for any aluminum wheel. The six-lug hub, the center bore and the lug seat all need to match before the wheel is installed, and a wheel that does not seat evenly should not be driven. Pilot fit should be snug without forcing the wheel on the hub, and lug nuts should be torqued in a star pattern.
Offset and backspacing decide how the rim sits relative to the brake caliper and fender. A test fit with the tire mounted shows whether the rim clears the caliper when the steering turns. Check tire diameter as well, since a larger tire can rub under load. Inspect the wheel after the first few drives, looking at lug torque and any sign of movement.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-7936 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 6 on 135 |
| Center bore | 110 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. The universal fit label does not identify a model. The six-lug 135 pattern and 110 center bore must match the hub, and the -6 offset then needs a clearance check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Six lug holes at 135 must line up exactly with the hub, so a 6 on 5.5 hub will not take this wheel. Test-fit with the tire mounted to confirm the caliper and suspension have room. Six lug holes on a 135 spacing must line up with the hub, and the 110 center bore should seat on the hub pilot. Check the -6 offset against the caliper with the tire mounted.
What’s included
One 17×9 polished aluminum wheel. Check the hub hardware before mounting.











