Overview
The Pro Comp PXA1069-6883 is a 16×8 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -12.
Pro Comp says these Vintage alloys combine head-turning style with light weight, cast with low-pressure technology. The brand describes its high offset design as intended for brake clearance, and this 8-inch-wide polished wheel has a backspacing of 4.
Key features
- Low-pressure cast aluminum
- Holes style face
- 16-inch diameter, 8-inch width
- 6 on 5.5 bolt pattern
- Center bore of 125
- Offset -12 with 4 backspacing
Choosing the right tire width
Tire width should match the rim width, and an 8-inch rim suits a specific range of sizes. A tire that is too narrow can look unbalanced on the rim, while one that is too wide may rub the fender or caliper during full steering. Check the tire’s rated width range against the rim before mounting.
Rim offset and tire size work together. A -12 offset moves the tire outward compared with a zero offset, which changes how the wheel sits against the brake caliper and inner fender. Test-fit with the tire mounted and turn the steering to both extremes.
Rotating and inspecting tires is good practice after any wheel change. Check for uneven wear on the tread, and rebalance the wheel if vibration appears at highway speed. Small pressure changes are easier to notice on a wider rim, so watch pressure closely in the first few weeks.
- Check the tire’s rated width range
- Test-fit at both steering extremes
- Rebalance if vibration appears
- Watch for uneven tread wear
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-6883 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 125 |
| Offset | -12 |
| Backspacing | 4 |
Vehicle fitment
No vehicle is named for this wheel, so it is a universal design rather than a fit for a specific truck or Jeep. A six-lug hub at 5.5 with a 125 center bore is required, and the -12 offset needs a clearance check.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a six-lug hub at 5.5 accepts this wheel. Confirm the 125 center bore against the hub pilot, and test-fit the rim with the tire to check the caliper. Six lug holes on a 5.5 spacing must match the hub, and the 125 center bore should seat on the hub pilot. Measure caliper clearance with the -12 offset and 8-inch rim once a tire is mounted.
What’s included
One 16×8 aluminum wheel. Lug nut and center cap inclusion is unclear, so review the delivered parts first.











