Overview
The Pro Comp PXA5173-21089 is a 20×10 aluminum spoke wheel from the Pro Comp 73 Series Trilogy line, in satin black milled with an 8 on 180 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -18.
This 10-inch-wide wheel has a backspacing of 4.75, and its eight-lug 180 pattern is a specific layout that must match the hub before any other fit decision is made.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 20-inch diameter, 10-inch width
- 8 on 180 bolt pattern
- Center bore of 125
- Offset -18 with 4.75 backspacing
Heavy-duty use and wheel inspection
Wheels used on heavy trucks and trail rigs see repeated impacts from ruts, rocks and landings. Each hit transfers load into the spokes and bead, so regular inspection matters more than in road-only use. Small cracks near the spoke roots or along the bead can grow under load, and they are easy to miss without a close look.
Tire pressure has a direct effect on how the rim takes an impact. Running lower pressure off road reduces the chance of bending the bead, but it also increases the tire’s flex on the rim, so pressure should match the load and terrain. Clean the wheel after each trip and keep a record of torque checks.
- Inspect spoke roots after hard landings
- Match tire pressure to load and terrain
- Log lug nut torque checks
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-21089 |
| Series | 73 Series Trilogy |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. An 8 on 180 hub with a 125 center bore is the first match, and the -18 offset needs a clearance check at the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount only to an eight-lug hub at 180 with a 125 center bore. Confirm the pattern on the vehicle before buying, then test-fit the 10-inch rim with the tire mounted. Eight lug holes on a 180 spacing must line up with the hub exactly, and the 125 center bore has to seat on the hub pilot. The 10-inch width and 20-inch diameter need a matching tire, with its sidewall affecting overall height. The -18 offset places the tire outboard, so measure inner fender and caliper clearance with the tire mounted. The 4.75 backspacing sets the room behind the mounting face. Compare the fit with the tire width you plan to run before mounting, and confirm all of these on the vehicle before recheck after any change in tire size or suspension height.
What’s included
One 20×10 aluminum wheel in satin black milled. Confirm the included hardware against your installation plan before starting.











