Overview
The Pro Comp PXA5164-217047 is a 20×10 aluminum eight-spoke wheel from the Pro Comp 64 Series Gunner, in satin black milled with an 8 on 170 bolt pattern. It is sold as one wheel with a center bore of 125.
The Gunner is a chiseled eight-spoke design with CNC-milled windows and a 3650-pound eight rating. This 10-inch-wide wheel has an offset of -18 and a backspacing of 4.75, and the Gunner is offered in 17- and 20-inch diameters with 5-, 6- and 8-lug patterns.
Key features
- Chiseled eight-spoke design
- CNC-milled windows
- 20-inch diameter, 10-inch width
- 8 on 170 bolt pattern
- Center bore of 125
- Offset -18 and backspacing 4.75
Eight-lug wheels and hub fit
Eight-lug wheels are less common than five-lug designs, so hub fit deserves a closer look. Each lug position must line up with the hub studs, and the bolt pattern is measured across the holes rather than from one stud to the next. A mismatch can seat the wheel on fewer studs, which puts uneven load on the rest. Buyers working with an uncommon layout often check the hub before buying tires, since tire choice depends on the wheel’s fit.
Eight-lug hubs appear on heavier trucks and some SUVs, and the wheel’s center bore should match the hub pilot for proper centering. Lug nut seat style matters as much as thread size. Keep torque checks in the maintenance routine, retighten after the first drives, and inspect studs for stretching or thread wear during tire service. Store spare wheels off the ground to keep the bead and finish in good condition.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5164-217047 |
| Series | 64 Series Gunner |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 3650 lbs (eight rating) |
| Finish warranty | Two years |
Vehicle fitment
No vehicle is named for this wheel. Treat it as a universal-fit design. The 8 on 170 hub and 125 center bore are the first match to confirm, followed by the -18 offset against fender and brake clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Eight lug holes at 170 must line up exactly with the hub. The -18 offset and 10-inch width should be test-fit with the tire and caliper in place before the wheel sees trail use. An 8 on 170 pattern with a 125 center bore has to match the hub on both measurements. The -18 offset and 10-inch width move the tire outward, so check fender and steering clearance with the tire mounted. Measure lug spacing across the holes before ordering, then compare it with the vehicle’s hub.
What’s included
One 20×10 aluminum wheel is included in the package.











