Overview
The Pro Comp 41 Series Phaser 20×9 wheel, part number PXA2641-298345, is a 20-inch aluminum split spoke wheel with a 9-inch width. It uses a 6 on 5.5 bolt pattern and a graphite finish, listed in the series as 41 Series Phaser graphite.
The wheel carries a 108 center bore, a -12 offset and a backspacing of 4.5. It is built from low-pressure cast aluminum, and because the offset is strongly negative the wheel sits farther outward. It is universal fit with no vehicle tied to it.
Key features
- Low-pressure cast aluminum
- 20-inch diameter, 9-inch width
- 6 on 5.5 bolt pattern
- Center bore 108
- Offset -12 and backspacing 4.5
- Graphite split spoke design
Graphite finish care
Graphite finishes show brake dust and road grime more than darker tones, so regular washing keeps them looking consistent. Use a mild soap and a soft brush, and rinse thoroughly to remove grit. Harsh chemicals can dull the finish over time, so choose products labeled safe for painted or coated wheels.
Because this wheel uses a split spoke design with a strongly negative offset, the spoke faces and the inner barrel both catch mud and water. After off-road use, rinse both sides and dry the spokes. Inspect the rim lip and spoke ends for chips or bends, since those areas take the most impact when the wheel meets obstacles.
- Wash with mild soap after mud runs
- Inspect rim lips for chips and bends
- Dry the spokes before storing the wheel
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA2641-298345 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -12 |
| Backspacing | 4.5 |
| Style | Split spoke |
| Finish | Graphite |
| Construction | Aluminum |
| Series | 41 Series Phaser |
Vehicle fitment
The wheel is universal fit and not tied to a specific vehicle. Check the 6 on 5.5 pattern and 108 center bore with the hub, and make sure the -12 offset clears the fender and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the brake caliper, tire diameter and fender clearance before mounting, because a 20-inch wheel with a -12 offset leaves less room than smaller wheels.
The graphite finish and split spoke design are the visual points, while the 6 on 5.5 pattern, 108 center bore and -12 offset decide fit. Compare all three with the hub before ordering.
What’s included
The package is one 20×9 graphite wheel. Review contents against your installation steps before work begins.













