Overview
The Pro Comp PXA7005-7873 is a 17×8 aluminum wheel from the 05 Series Torq line, finished in flat black with a split-spoke design. It has a 5 on 5 bolt pattern, a center bore of 83, an offset of 0 and a backspacing of 4.5.
The Torq is cast with low-pressure technology and built for performance trucks and sport utility vehicles. The 83 center bore is the main hub measurement to confirm before mounting.
The 5 on 5 pattern and 83 center bore are the two numbers that decide whether this 17×8 wheel mounts to a hub. The 0 offset places the face near the centerline of the wheel, so the brake caliper and fender clearance should be checked before the wheel is installed.
The flat black finish and split-spoke face are the appearance features of this wheel. The cast aluminum body is made with low-pressure technology. Confirm the tire size and load rating for a 17-inch rim before mounting.
Measure the hub before ordering and confirm the 5 on 5 pattern and the 83 center bore. Check the offset and backspacing against the fender and brake caliper, and choose a tire rated for the 17-inch, 8-inch wide rim before mounting the wheel on the truck.
Key features
- Flat black finish
- Split-spoke aluminum design
- 5 on 5 bolt pattern
- Center bore 83
- Offset 0
Keeping a flat black finish
Flat black finishes hide dirt differently from gloss, and fine brake dust can settle into the texture. Wash with a soft mitt and a non-abrasive cleaner, and avoid polishing compounds that leave a sheen. A light coat of wax on the barrel can help, though it is best kept off the flat face. Rinsing after off-road runs removes mud before it dries onto the split-spoke face.
Chip and stone damage shows most on dark finishes at the leading edge of the spokes. Touch-up paint designed for wheels can help seal small chips, but cracked or bent wheels need replacing rather than repainting. Tire balance should be checked after any wheel repair.
- Use a soft mitt and non-abrasive cleaner
- Avoid polish that leaves a glossy film
- Rinse mud off after trail use
- Inspect spoke edges for stone chips
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7005-7873 |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 4.5 |
| Style | Split spoke |
| Finish | Flat black |
| Construction | Aluminum |
| Series | 05 Series Torq |
Vehicle fitment
It is a universal-fit wheel. Check the 5 on 5 bolt pattern, the 83 center bore and the 0 offset against your truck before buying.
Tire size and load rating must suit a 17×8 wheel. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. Review the package contents against your installation before starting.











