Overview
The Pro Comp PXA7089-7865 is a 17×8 matte black aluminum spoke wheel from the Pro Comp 89 Series Kore line, with a 5 on 4.5 bolt pattern. It is sold as one wheel with a center bore of 83 and a zero offset.
Pro Comp describes its alloys as low-pressure cast and offers the Kore with head-turning style and light weight. This 8-inch-wide wheel has a backspacing of 4.5, and the brand’s high offset design is aimed at brake clearance on performance trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 17-inch diameter, 8-inch width
- 5 on 4.5 bolt pattern
- Center bore of 83
- Zero offset with 4.5 backspacing
Hub and lug checks
Wheel fit on a five-lug hub depends on every lug hole lining up with the studs and on the center bore sitting correctly on the hub. Before mounting, clean the hub face and remove any rust or paint that could hold the wheel slightly off. Check the studs for damage and replace any that are bent or stripped.
A matte black finish needs careful handling during install. Use padded tire changer arms so the coating is not scuffed, and keep the bead lubricated with lubricant made for tires. After the first drive, recheck the lug nuts and look at the finish around the spokes and hub for contact marks from the brake caliper or suspension.
- Clean the hub face before mounting
- Replace bent or stripped studs
- Recheck lug nuts after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7089-7865 |
| Series | 89 Series Kore |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Matte black (flat black) |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 4.5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 4.5 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a model. Match the 5 on 4.5 pattern and 83 center bore to the hub, then check the zero offset against the vehicle’s clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A five-lug hub measuring 4.5 across the bolt holes is required. Test-fit the 17-inch rim with the tire mounted to confirm the caliper and suspension have room at full lock. Five lug holes on a 4.5 spacing must line up exactly with the hub, and the 83 center bore has to seat on the hub pilot. The 8-inch width and zero offset place the tire at the centerline, so the inner and outer fender clearances are similar. The 4.5 backspacing sets the inner lip position behind the mounting face. Choose a tire width that suits an 8-inch rim, and test-fit with the tire mounted before trail use. Recheck after any change in tire diameter or suspension height, and measure steering and brake clearance at full lock. The matte black finish does not change the fit checks.
What’s included
One 17×8 aluminum wheel. Lug nuts and a center cap are not confirmed as included.











