Overview
The Pro Comp PXA5162-218347 is a 20×10 aluminum split-spoke wheel from the Pro Comp 62 Series Apex line, in satin black milled with a 6 on 5.5 bolt pattern. It is one wheel, with a center bore of 108 and an offset of -18.
Low-pressure casting is used for this wheel, and its alloy range is rated from 2500 to 3650 lbs per wheel. The 10-inch width, -18 offset and 4.75 backspacing set how far the tire sits from the brake and suspension parts, so check the offset early in the build.
Key features
- Low-pressure cast aluminum
- Split-spoke face style
- 20-inch diameter and 10-inch width
- 6 on 5.5 bolt pattern
- Center bore of 108
- Offset -18 with 4.75 backspacing
Matching the six-lug hub
Six-lug hubs come in several patterns, and the wheel must match the exact one. A pattern with a different circle diameter can look close but will not seat correctly. Measure the hub studs or check the vehicle’s service information before buying, and compare the pattern against the wheel’s mounting holes.
The offset and backspacing decide how the wheel clears the inner and outer parts. Tire bead, brake caliper and steering knuckle are the usual contact points. Test-fit with the tire mounted, turn the steering to full lock before driving, and recheck lug torque after the first few miles on a new wheel.
- Verify the hub pattern before ordering
- Check caliper clearance with the tire mounted
- Re-torque after the first trail runs
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5162-218347 |
| Series | 62 Series Apex |
| Style | Split spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not identify a truck or Jeep. Compare the 6 on 5.5 hub and 108 center bore with the vehicle first, then check the -18 offset against the fender and caliper.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a six-lug hub at 5.5 accepts this wheel. A 10-inch-wide rim needs a matching tire, and a test fit at the caliper shows whether the offset clears the brake parts. Compare the 4.75 backspacing against the inner clearance you measured on the vehicle. A 6 on 5.5 hub is a different layout from 6 on 135, so match the exact pattern on the vehicle.
What’s included
One 20×10 aluminum wheel. Check fastener needs for the hub before you start installing.











