Select your vehicle
-13%

Pro Comp 40 Series Vertigo Wheel, 17x9 with 5 on 5 Bolt Pattern – Matte Graphite – 2640-7973

Pro Comp Alloy Wheels

Shop Pro Comp Alloy Wheels 17x9 5x5 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 40 Series Vertigo 17×9, part number PXA2640-7973
  • 5 on 5 bolt pattern, center bore 72
  • Gray matte graphite split spoke wheel
  • Offset -6, backspacing 4.75

Description

Overview

The Pro Comp 40 Series Vertigo 17×9 wheel, part number PXA2640-7973, is a 17-inch aluminum split spoke wheel with a 9-inch width. It uses a 5 on 5 bolt pattern and a 72 center bore, and the finish is gray, named in the series as 40 Series Vertigo matte graphite.

The Vertigo is built with low-pressure casting. Its -6 offset and 4.75 backspacing place the mounting face farther outward than on a zero-offset design, and the wheel is universal fit, so the hub and clearance should be checked before buying.

Key features

  • Low-pressure cast aluminum
  • 17-inch diameter, 9-inch width
  • 5 on 5 bolt pattern
  • Center bore 72
  • Offset -6, backspacing 4.75
  • Matte graphite split spoke finish

Caring for a gray matte finish

Matte finishes show scratches and water spots differently than gloss, so the wheel should be cleaned with gentle products. Road salt and brake dust sit on the surface, and a mild soap with a soft brush removes them without polishing the finish. Avoid waxes and sealants that add gloss, since they can make the surface look uneven.

Gray spokes with a split design hide light wear well, but chips near the rim lip are easy to miss. Inspect the lip and spoke ends after rough trail use, and touch up small chips before corrosion starts. Keep a spare tire and jack available when the wheel goes off-road, so a flat does not turn into bent spokes.

  • Inspect the rim lip after rough trail runs
  • Use a soft brush with a mild soap
  • Touch up small chips early

Specifications

Brand Pro Comp Alloy Wheels
Part number PXA2640-7973
Wheel diameter 17 inches
Wheel width 9 inches
Bolt pattern 5 on 5
Center bore 72
Offset -6
Backspacing 4.75
Style Split spoke
Finish Gray, matte graphite
Construction Aluminum
Series 40 Series Vertigo

Vehicle fitment

This wheel is not assigned to any make, model or year. The universal fit entry means the 5 on 5 pattern and 72 center bore should be matched to the hub, and the -6 offset checked against the fender.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Negative offset moves the wheel outward, so confirm fender and suspension clearance before driving. The 72 center bore must suit the hub for the wheel to seat correctly.

What’s included

The package is one 17×9 gray matte graphite wheel. Verify the package contents against your planned installation before starting.

SKU: PXA2640-7973 Categories: ,

Questions & Answers

What center bore does the PXA2640-7973 have?

The center bore is 72, with a 5 on 5 bolt pattern. Measure your hub and confirm both values before ordering, since the wheel is universal fit.

Is this Vertigo wheel gray or graphite?

The finish is gray with a matte graphite look. It is a split spoke design in aluminum with a 9-inch width, and the offset and bolt pattern should be checked together when choosing it.

What offset does this 17x9 wheel use?

The offset is -6 and the backspacing is 4.75. A negative offset places the mounting face outward, so check the fender and brake clearance before mounting.

How should a gray matte finish be maintained?

Wash with a mild soap and a soft brush, then rinse thoroughly. Avoid harsh abrasives on matte finishes, since they can leave shiny patches that change the look of the wheel over time.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Alloy Wheels 17x9 5x5 on Amazon