Overview
The Pro Comp 89 Series Kore in 17×8 inches is a cast aluminum spoke wheel in flat black, part number PXA7089-7883, drilled for a 6 on 5.5 bolt pattern. It belongs to Pro Comp Alloy Wheels’ 89 Series, a line the brand offers for trucks and SUVs that run larger tires and need room for the brakes.
This version has a 0 offset, which puts the mounting face right on the centerline of the rim, and a 4.5 backspacing that measures how far the back of the wheel reaches behind that face. Its 108 center bore is the opening that centers the wheel on the hub, so the hub diameter is the first measurement to confirm before anything else.
Key features
- Cast aluminum spoke design with a flat black finish
- 17 inch diameter and 8 inch width
- 6 on 5.5 bolt pattern
- 108 center bore for hub centering
- 0 offset and 4.5 backspacing
- Part of the 89 Series line from Pro Comp Alloy Wheels
Hub bore and centering
The center bore is the opening that fits over the hub, and a snug fit keeps the wheel centered before the lug nuts take the load. A bore that is too large relies only on the lug nuts for centering, which can cause vibration. A hub-centric ring can close that gap, and it should match the bore and hub exactly.
Care after mounting matters as much as the first fit. Check lug nut torque after the first few drives and again after tire rotations. Keep the hub face clean of rust and debris, since buildup can push the wheel out of true. If vibration appears, check the centering and the hub face before assuming the tire is the cause.
- Keep the hub face free of rust
- Re-torque lug nuts after initial drives
- Check tire balance if vibration appears
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7089-7883 |
| Series | 89 Series Kore |
| Construction | Aluminum |
| Style | Spoke |
| Finish | Flat black |
| Diameter | 17 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | 0 |
| Backspacing | 4.5 |
Vehicle fitment
Fit depends on the hub matching this wheel’s 6 on 5.5 bolt pattern and 108 center bore. Compare the 0 offset and 4.5 backspacing with your vehicle’s wheel specifications, and confirm fender and brake clearance. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use lug nuts whose seat type matches this wheel’s lug holes. If the hub bore is smaller than 108, do not force the wheel on; a hub-centric fit depends on the bore matching the hub. A zero-offset wheel sits farther out than a positive-offset wheel of the same width, so check the outer fender and the tire’s position after mounting.
What’s included
One 17×8 aluminum wheel, part number PXA7089-7883. Check that the lug nuts and any center cap you plan to use suit this wheel.














