Overview
The Pro Comp PXA5160-7973 is a 17×9 aluminum wheel from the Pro Comp 60 Series Hammer line, in a satin black milled finish with a windowed face and a 5 on 5 bolt pattern. It is sold as a single wheel.
The alloy is cast with low-pressure casting technology and rated from 2500 to 3650 lbs per wheel across the alloy line. This 9-inch-wide wheel has a center bore of 72, an offset of -6 and a backspacing of 4.75. Those offset and backspacing figures set how the rim sits behind the brake caliper, so the 72 center bore should be matched to the hub. The Pro Comp Promise, a transferable warranty, covers this alloy line.
Key features
- Aluminum construction made by low-pressure casting
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern with a center bore of 72
- Satin black milled finish
- Offset -6 with 4.75 backspacing
- Load rating of 2500 to 3650 lbs per wheel.
Load ratings and wheel fit
A wheel’s load rating and the tire’s load index work together. The tire must carry at least the share of weight placed on it, and the wheel should never be asked to exceed its rated capacity. For a 9-inch-wide aluminum wheel, pick a tire whose width and load index suit your vehicle and your driving, since an overloaded wheel can crack at the spokes or the lip.
The center bore is the hole that centers the wheel on the hub. A bore that is larger than the hub pilot lets the wheel sit off center, which can cause vibration at speed. Hub-centric rings fill that gap and carry part of the load, while the lug nuts clamp the wheel in place. Check the fit before driving, and re-torque after the first few drives.
- Match the tire load index to the wheel’s rated capacity
- Use hub-centric rings when the center bore is larger than the hub
- Tighten lug nuts in a star pattern
- Check bead seating after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5160-7973 |
| Series | 60 Series Hammer |
| Style | Windowed |
| Construction | Aluminum |
| Finish | Satin black |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.75 |
| Load rating | 2500 to 3650 lbs per wheel (Pro Comp alloy range) |
Vehicle fitment
No vehicle is named for this wheel. Pro Comp’s universal fit label does not tie the Hammer to a model, so check the 5 on 5 bolt pattern, the 72 center bore and the -6 offset against your hub and brake clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use a 5-lug hub with a 5 on 5 pattern. Test-fit the -6 offset with the tire and caliper in place, and confirm the 9-inch width suits the tire you plan to mount.
What’s included
One 17×9 aluminum wheel. Lug nuts and a center cap come separately.











