Overview
The Pro Comp 4 Inch Lift Kit with ES9000 Shocks, part number K2090B, is a 4-inch lift for 2013-2018 Ram 3500 trucks with Pro Comp’s radius arm suspension. The front uses coil springs with radius arm drop brackets, and the rear uses lift blocks and U-bolts. The lift height range is 3 to 4.99 inches.
The steering correction, sway bar links, bump stop extensions and brake line extension brackets match the K2089B. ES9000 shocks are included with the kit. Confirm the front shock setup before installing.
Key features
- 4-inch stage 1 lift
- Radius arm suspension type
- Coil springs with radius arm drop brackets
- Pitman arm steering correction
- Front sway bar links and bump stop extensions
- Brake line extension brackets
- Rear lift blocks and U-bolts
Radius arm inspection
Regular inspection matters more on a radius arm front end than on many other lifts, because the arms, brackets and joints move through a wide range of travel. Look for cracked rubber in the bushings, bent drop brackets and loose hardware at the crossmember. Any clunk on turns or over bumps should be traced before it becomes a steering problem.
A pitman arm steering correction changes the steering linkage geometry, so the drag link and steering box should be checked for play after installation. Replace worn joints in matched pairs when possible, and confirm the front sway bar links move freely. A proper alignment after the lift keeps tire wear even and helps prevent the steering from pulling to one side.
- Check drag link and steering box for play
- Inspect sway bar links for wear
- Retorque hardware after the first trips
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2090B |
| UPC | 700006823721 |
| Lift height | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm or radius arm brackets |
| Front lift | Coil springs and radius arm drop brackets |
| Steering correction | Pitman arm |
| Rear lift | Lift blocks and U-bolts |
| Shocks | ES9000, included |
| Fitment | Direct fit |
Vehicle fitment
The kit is for the 2013-2018 Ram 3500 and covers the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
Ram 2500 and 1500 trucks, and 2012 and earlier or 2019 and later Ram 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A radius arm front end changes alignment and steering geometry, so have the alignment and steering checked after installation.
What’s included
Included with the kit are front coil springs and radius arm drop brackets, front sway bar links, bump stop extensions, a pitman arm steering correction, brake line extension brackets and rear lift blocks with U-bolts, plus ES9000 shocks.









