Overview
The Pro Comp 6 Inch Stage II Lift Kit with ES9000 Shocks, part number K2067B, is a 6-inch lift for the 2006-2008 Dodge Ram 2500 and 3500. It uses a coil spring and short arm front end with a pitman arm steering correction.
The front uses coil springs with upper and lower control arms, and the steering correction is a pitman arm. Front sway bar links and bump stop extensions are included. The rear uses a block and U-bolt kit, and ES9000 front shocks are listed with the shocks included.
Key features
- 6-inch lift
- Coil springs with upper and lower control arms
- Coil spring and short arm design
- Pitman arm steering correction
- Front sway bar links and bump stop extensions
- Brake line extension brackets
- ES9000 front shocks, included
Coil spring front end basics
Coil spring and short arm lifts raise the front by swapping springs and control arms, which keeps the wheel travel and ride feel close to the original design. The short arm geometry is a common reason this type of kit is chosen for trucks that carry daily loads.
A pitman arm steering correction changes the way the steering box connects to the front wheels, so it is a change to steering geometry rather than a cosmetic upgrade. Front sway bar links and bump stop extensions help the suspension keep its control at the new height.
Brake line extension brackets allow the lines to reach the new position without strain. Inspect the lines after the install and check the sway bar links, bushings and shock mounts for wear over time.
- Check steering play after installation
- Inspect brake lines for stretch or chafing
- Watch sway bar link bushings for wear
- Confirm rear block and U-bolt torque
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2067B |
| UPC | 614901122862 |
| Lift height | 6 inches |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Steering correction | Pitman arm |
| Rear lift | Block and U-bolt kit |
| Front shocks | ES9000 |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2006-2008 Dodge Ram 2500 (Laramie, SLT, ST, SXT, Sport and TRX4) and the 2006-2008 Dodge Ram 3500 (Laramie, SLT, ST, SXT and Sport). Ram 1500 trucks and Ram 2500 and 3500 model years outside 2006-2008 are not covered. Check your truck’s year, model and trim before buying.
Ram 1500 trucks and Ram 2500 and 3500 model years outside 2006-2008 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A pitman arm correction with control arm components changes steering geometry, so have the steering and alignment checked after installation.
What’s included
The kit includes front coil springs, upper and lower control arm components, front sway bar links, bump stop extensions, a pitman arm steering correction, brake line extension brackets, a rear block and U-bolt kit, and ES9000 front shocks.









