Overview
Part number EXPK5064T (kit K5064T) is a stage 1 suspension lift for the 1964 to 1974 Toyota Land Cruiser Base. It has a 2.5-inch stage 1 lift and a lift height range of 0 to 3.5 inches.
The kit uses coil springs at the rear and ES3000 shocks at the front, with shocks included. The specifications list a 2.5-inch stage 1 lift.
The specifications list shocks as included, with ES3000 at the front and no rear shock type. Confirm the rear shock and tire clearance for this lift range before ordering.
The title and specifications both list a 2.5-inch stage 1 lift, and Pro Comp gives a lift range of 0 to 3.5 inches for the kit.
Coil springs and rear shocks
Coil springs give the rear a different spring rate from leaf springs, and they are often used on a lift that raises both ends. Because coils change how the rear loads, they can change how the truck responds to cargo and trail bumps. Measuring the truck after installation shows whether the rear is sitting where you intended.
Rear shocks are often reviewed when coil springs are fitted, since the new spring height and travel can call for a different shock length. Worn upper and lower mounts should be replaced at the same time so the shock works as designed. Coil isolators at the top and bottom of each spring also deserve a visual check.
- Rear shock length and mount condition
- Coil isolator condition
- Rear ride height measurement
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK5064T |
| Kit code | K5064T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 2.5 inches stage 1; range 0 to 3.5 inches |
| Rear lift method | Coil springs |
| Shocks included | Yes |
| Front shocks | ES3000 |
| Fit type | Direct fit |
Vehicle fitment
Covers the 1964 to 1974 Toyota Land Cruiser Base models.
The list does not include the 1975 to 1980 Land Cruiser. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rear uses coil springs, the rear height and the front height both change, so measure the truck after the install and check it against the factory specification.
What’s included
The stage 1 lift kit with ES3000 front shocks.













