Overview
The Pro Comp K4061T is a 6 inch Stage I lift kit with PRO-X shocks for the 1990-1996 Ford Bronco. Part number EXPK4061T is also used for this kit.
This Pro Comp lift kit has a lift height range of 6-7 inches. The rear lift uses an add-a-leaf, and the kit includes PRO-X shocks for both the front and the rear.
Key features
- 6 inch Stage I lift kit with a lift height range of 6-7 inches
- PRO-X shocks included, front and rear
- Rear lift method: add-a-leaf
- Complete suspension system and lift kit
- Direct fit for the listed Bronco years
Before you lift
A suspension lift raises the body relative to the axles, which changes the geometry of the steering, driveline and brakes. Taller ride height also shifts the center of gravity, so braking distance, steering response and body roll can all feel different on pavement. Off-road, the extra height helps clear rocks and uneven ground, but it asks more of the driveline angles and the tires. Springs and shocks work as a pair, so new shocks change how the lift rides as well as how the truck sits.
Older Bronco suspensions often have worn bushings, leaking shocks or tired leaf springs. Replacing those parts at the same time as the lift keeps the new geometry from loading worn components early.
- Inspect bushings, leaf springs and mounts before installation
- Check brake lines and the fuel line for stretch after lifting
- Plan for an alignment and a fastener re-check after the first drive
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4061T |
| Product type | Complete suspension system and lift kit |
| Manufacturer part number | EXPK4061T |
| Lift kit | 6 inches stage 1 |
| Lift height range | 6-7 inches |
| Shocks series | PRO-X |
| Front shocks | PRO-X shocks |
| Rear shocks | PRO-X |
| Shocks included | Yes |
| Rear lift method | Add-A-Leaf |
| Rear lift component | Add-A-Leaf |
| Fitment type | Direct fit |
Vehicle fitment
Listed fitment: 1990-1996 Ford Bronco (Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite, XLT Sport).
It fits the Ford Bronco for 1990-1996 only, not earlier Broncos, later Bronco generations or other Ford trucks. Confirm fit for your vehicle’s year, model, trim, engine, transmission and axle configuration before ordering.
Installation notes
Suspension parts affect steering, braking and handling, so professional installation is recommended. Use the specified hardware, torque every fastener to specification and re-check fasteners after the first miles of driving. Have the alignment checked after any suspension work. Confirm brake line, driveshaft and tire clearance after installation, and check local regulations on lift and vehicle modification. Changes in ride height can affect headlight aim, so check it afterward, and keep a record of the parts installed for future maintenance.
What’s included
A 6 inch Stage I lift kit with PRO-X front and rear shocks and a rear add-a-leaf.
Not included: Alignment service, and any parts required beyond the contents of this kit.













