Overview
The Pro Comp K5057B is a 4-inch Stage 2 lift kit with ES3000 front and rear shocks for the 1986–1995 Toyota 4Runner and Toyota Pickup. The front uses steering knuckle spacers and front and rear crossmembers, and the rear uses a block and U-bolt lift that raises the body on the rear axle.
Front sway bar links and bump stop extensions come with the kit, and the upper control arm mount brackets are part of the Stage 2 front package. The lift height range for this 4-inch kit is 3 to 4.99 inches.
Key features
- 4-inch lift height, Stage 2
- Steering knuckle spacers
- Front and rear crossmembers
- Front sway bar links
- Bump stop extensions
- Upper control arm mount brackets
Comparing stage levels
Stage 2 kits add front pieces that influence how the suspension moves at full travel. Sway bar links keep the anti-roll bar connected at the new height, and bump stops control how far the axle can compress. Upper control arm brackets change the mounting angle, which is why an alignment check is part of the job.
Tire clearance and steering feel are the next things to look at. A taller front end may need a steering stop check and a look at the brake hoses. Drivers who use the truck off road often inspect these parts after each season, since trail impacts loosen fasteners faster than road use does.
- Sway bar links keep the bar connected
- Bump stops limit compression travel
- Check brake hoses after the install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5057B |
| UPC | 614901207248 |
| Lift height | 4 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Spacer |
| Front lift | Steering knuckle spacers |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
Vehicle fitment
It fits the 1986–1995 Toyota 4Runner in the DLX and SR5 versions, and the 1986–1995 Toyota Pickup in the Base, Base Turbo, DLX, SR5 and SR5 Turbo versions.
The listed years end in 1995, so trucks from 1996 onward are not included on this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With knuckle spacers and upper control arm brackets in place, the front geometry changes, so the alignment should be set and the driveline angles checked after installation.
What’s included
The kit includes steering knuckle spacers, front and rear crossmembers, front sway bar links, bump stop extensions, upper control arm mount brackets, the rear block and U-bolt kit, and ES3000 front and rear shocks.









