Overview
The Pro Comp K3071 is a 2.5-inch stage 1 leaf spring lift for older Jeep CJ models, with ES3000 shocks at both ends. It fits 1959–1966 CJ3, 1959–1968 CJ5, 1966–1968 CJ5A, 1959–1968 CJ6 and 1966–1968 CJ6A models, plus 1954–1958 Willys CJ-3, CJ-5 and CJ-6 models.
The front uses leaf springs and the rear uses springs with U-bolts. ES3000 shocks are supplied at both ends, and the specifications mark the kit as a rear position part. Wheels should be 15 inches or larger.
Key features
- 2.5-inch stage 1 lift
- Front leaf springs
- Rear springs and U-bolts
- ES3000 front and rear shocks
- Wheel size 15 inches or larger
- Wheel width 8 to 12 inches
Older CJ frame checks
Early CJ frames were built with a variety of mounting points, and years of rust can change the shape of the spring perches. Before lifting, inspect the frame rails near the spring hangers and the axle housing for cracks, bent brackets or heavy corrosion. A sound frame gives the leaf spring and U-bolt setup a stable base.
Leaf springs on these trucks often carry more load than the original setup was designed for, so check the spring eyes, shackle bolts and bushings for wear. Replacing the shackle hardware at the same time keeps the new springs seating correctly and reduces noise on rough roads.
Once the lift is in, drive slowly over a rough road and listen for clunks. Re-check the U-bolts and spring hardware after the first few outings, and inspect the brake lines for stretch at full droop.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K3071 |
| UPC | 614901123289 |
| Lift | 2.5 inches, stage 1 |
| Suspension type | Leaf spring |
| Front lift | Leaf springs |
| Rear lift | Springs and U-bolts |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Position | Rear |
| Max tire size | 32×11.50 |
| Wheel size range | 15 inches or larger |
| Wheel width range | 8 to 12 inches |
| Min-max backspace | 3.25 to 4.5 inches |
Vehicle fitment
It fits 1959–1966 Jeep CJ3 Base, 1959–1968 Jeep CJ5 Base, 1966–1968 Jeep CJ5A Base, 1959–1968 Jeep CJ6 Base and 1966–1968 Jeep CJ6A Base models, along with the 1954–1958 Willys CJ-3, CJ-5 and CJ-6. Later CJ and Wrangler generations do not fit this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Older CJ frames and axles vary in their mounting points, so check the leaf spring and U-bolt fit before the springs are fully torqued. Check the driveline angles after the lift is installed.
What’s included
The kit includes front leaf springs, rear springs and U-bolts, and ES3000 front and rear shocks.









