Overview
The Pro Comp 6″ Lift Kit with PRO-X Shocks, part number EXPK1057T (K1057T), is a 6 in. suspension lift kit for the 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, including the 2007 Silverado 1500 Classic and Sierra 1500 Classic. The lift height range is 6-7 inches, and the kit includes shocks.
The rear lift uses a block/spacer method, and the front shocks are RRD 2.625. The kit is direct fit for the trucks covered below. Confirm the drivetrain and cab configuration of your truck before ordering.
Key features
- 6 in. suspension lift kit
- Lift height range of 6-7 inches
- Shocks included
- Front shocks: RRD 2.625
- Rear lift method: block/spacer
- Direct fit for the listed Silverado 1500 and Sierra 1500 trims
Setting up a block-spacer lift
A block or spacer rear lift raises the rear of the truck by adding hardware between the axle and the springs. It is a simple way to gain height, but it moves the axle position and changes driveline angles. The longer the spacer stack, the more these angles change, so the installation should be checked carefully.
Front and rear height should be balanced so the truck does not sit unevenly. Shocks change length with the lift, so the front shocks and any rear shock length should be checked for full travel without binding. After installation, re-check fasteners, brake lines and steering clearance, and have the alignment set on level ground. Plan on time for a few short test drives before highway use.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK1057T |
| Product type | Suspension lift kit |
| Suspension type | Lift kit |
| Lift | 6 in. suspension lift kit |
| Lift height range | 6-7 inches |
| Rear lift method | Block/spacer |
| Shocks included | Yes |
| Front shocks | RRD 2.625 |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 1999–2006 Chevrolet Silverado 1500 (Base, Hybrid, LS, LT, SS, WT, Z71), the 2007 Chevrolet Silverado 1500 Classic (Hybrid, LS, LT, WT), the 1999–2006 GMC Sierra 1500 (Base, Denali, HT, Hybrid, SL, SLE, SLT, WT) and the 2007 GMC Sierra 1500 Classic (Hybrid, SL, SLE, SLT, WT).
The 2007 and later redesigned Silverado and Sierra and the 2500 and 3500 HD models are not covered by this kit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Support the vehicle on jack stands or a lift on level ground, never on a jack alone. Tighten all fasteners to the torque values from the wheel or vehicle maker, and re-check fastener tightness after the first miles of driving.
Suspension work changes ride height, steering geometry and brake line and driveline clearances, so professional installation is recommended, and a wheel alignment is advised afterward. Check your local regulations on vehicle lift height and equipment.
A lift can change brake line, driveline, steering and bumper-to-tire clearances. Check them through full suspension and steering travel after installation, and recheck headlight aim.
What’s included
A 6 in. suspension lift kit with shocks, a block/spacer rear lift and RRD 2.625 front shocks. Check the package contents against your installation before starting.
Not included: Any parts beyond the items above; confirm the full kit contents before starting the install.













