Overview
The Pro Comp K5078B is a 5.5-inch Stage 1 lift kit for the 2010–2014 Toyota FJ Cruiser Base, in 2WD and 4WD. It is a complete front and rear package with crossmembers, compression struts and mounts, rear upper control arms and rear coil springs, plus rear ES9000 series shock absorbers.
The kit uses weld-on knuckle and front control arm steering stop extensions, so installation requires welding. Tire sizes up to 35 x 12.50R18-20 are suited to 18 to 20 inch wheels.
Key features
- 5.5-inch lift height from a Stage 1 kit
- Crossmembers and differential spacers and mounts
- Compression struts and mounts
- Weld-on knuckle and control arm steering stop extensions
- Rear upper control arms, rear coil springs and rear track bar relocation bracket
- Rear ES9000 series shock absorbers
Before you weld the steering stops
Weld-on steering stop extensions are a permanent change, so plan the install in a shop or a space with proper welding gear. Clean the mating surfaces to bare metal, and check the fit of the knuckle and control arm extensions before the final weld. A test fit with the wheels off makes it easier to see clearance. Heat can warp nearby parts, so protect wiring and rubber components during the work.
Once the lift is in, the front and rear geometry changes, so the driveline and brake lines need a close look. Brake line extensions should clear the components at full travel, and the sway bar drops should not bind. Expect the steering to feel different until the alignment is set.
- Mark the stop positions before welding
- Confirm brake line clearance through full suspension travel
- Recheck weld joints after the first off-road trip
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5078B |
| UPC | 70000524373 |
| Lift height | 5.5 inch |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Rear lift | Coil springs |
| Rear shocks | ES9000 series |
| Front shocks | Re-use OEM |
| Maximum tire size | 35×12.50R18-20, 305/70R18, 325/65R18, 295/60R20 |
| Wheel size | 18 to 20 inch by 9 inch wide, 4.5 to 5 inch backspacing |
Vehicle fitment
The kit is made for the 2010–2014 Toyota FJ Cruiser Base, in 2WD and 4WD versions.
The list covers the 2010 through 2014 model years, so the 2009 and earlier FJ Cruisers and the trucks from 2015 onward are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The steering stop extensions are weld-on parts, so the install requires welding, and the OEM wheels will not fit with this lift. Have the alignment checked after installation and confirm the brake line extensions clear the components at full travel.
What’s included
The kit includes crossmembers, front bump stops, differential spacers and mounts, weld-on knuckle and control arm steering stop extensions, front brake line extensions, compression struts and mounts, sway bar drop brackets, a rear driveshaft spacer, rear bump stops, rear sway bar end links, a rear track bar relocation bracket, rear upper control arms, rear coil springs, and rear ES9000 series shock absorbers.









