Overview
The Pro Comp K5060B is a 4-inch Stage 1 lift kit with ES3000 front shocks for the 1990–1995 Toyota 4Runner and Toyota Pickup. The front is raised with steering knuckle spacers and front and rear crossmembers, and the rear uses coil springs with a block and U-bolt kit.
Front sway bar spacers keep the front anti-roll bar working at the new height. Bump stop extensions and upper control arm mount brackets are included, and the rear lift uses coil springs.
Key features
- 4-inch lift height, Stage 1
- Steering knuckle spacers
- Front and rear crossmembers
- Front sway bar spacers
- Bump stop extensions
- Upper control arm mount brackets and coil springs at the rear
Coil springs and spacers
Coil springs and spacers handle the lift in different ways. Spacers move the front components up, while coil springs set the rear height and the load rate. Matching the rear springs to the front lift keeps the truck from sitting nose high or tail low, which affects both handling and tire wear.
Sway bar spacers reduce the change in roll at the new height, but they do not replace a full alignment. Inspect the front bushings and the sway bar end links after install. Coil springs often compress over time, so a check after several months of use can show whether the rear height has settled.
- Check rear height after the first months
- Inspect sway bar bushings for wear
- Confirm alignment after install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5060B |
| UPC | 614901207286 |
| Lift height | 4 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Spacer |
| Front lift | Steering knuckle spacers |
| Rear lift | Coil springs with block and U-bolt kit |
| Front shocks | ES3000 |
Vehicle fitment
It fits the 1990–1995 Toyota 4Runner in the SR5 version, and the 1990–1995 Toyota Pickup in the DLX and SR5 versions.
The list covers only the 1990 through 1995 model years, so 1986 through 1989 and the later generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Knuckle spacers and the upper control arm brackets change the front geometry, so the alignment should be checked and the driveline angles measured once the install is complete.
What’s included
The kit includes steering knuckle spacers, front and rear crossmembers, front sway bar spacers, bump stop extensions, upper control arm mount brackets, the rear coil springs with the block and U-bolt kit, and ES3000 front shocks.









