Overview
The Pro Comp K4079B is a 6-inch stage 1 coil spring lift for the 1981–1989 Ford F-150. The front uses coil springs with radius arm brackets, and the rear is raised with a block and U-bolt kit. The lift height range is 5 to 6.99 inches.
ES3000 front and rear shocks are supplied. Bump stop extensions, a pitman arm for steering correction and extended length brake lines are included. The shock boots are not included.
Key features
- 6-inch lift in a stage 1 design
- Front coil springs with radius arm brackets
- Rear block and U-bolt lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Before and after the install
A stage 1 lift changes ride height and suspension geometry, so the parts should be matched to the truck and the way it will be driven. Coil springs at the front and a block at the rear raise the body, but the steering, brake lines and driveline all shift at the same time. Plan to check each of these once the new height is set.
Shock absorbers are usually replaced with a lift because the stock units are sized for the original height. Look for fluid leaks, worn bushings and noise over bumps as signs the old parts are worn. Inspect the steering linkage, ball joints and axle U-bolts after the first few drives, and retorque fasteners as part of routine care.
- Check brake hoses for stretch at full droop
- Recheck U-bolt torque after the first few drives
- Look for worn bump stops before adding new ones
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4079B |
| UPC | 614901125221 |
| Lift | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arm brackets |
| Rear lift | Block and U-bolt kit |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits 1981–1989 Ford F-150 trucks. Bronco models and other Ford years are not covered by this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A block and U-bolt rear lift with radius arm brackets changes the geometry at both ends, so check the alignment and the driveline angles after installation. Confirm the brake lines reach at the new height before the wheels are refitted.
What’s included
The kit includes front coil springs, radius arm brackets, bump stop extensions, a pitman arm, extended length brake lines, a rear block and U-bolt kit and ES3000 front and rear shocks. Shock boots are not included.









