Overview
The Pro Comp K2074T is a 6-inch long arm lift kit with PRO-X front and rear shocks for the 2007–2008 Dodge Ram 2500 and Dodge Ram 3500. The lift height range is 6 to 7 inches, and the kit is a stage 2 build.
The rear is lifted with a block and U-bolt setup, and both the front and rear shocks are PRO-X. It fits the 2500 in the Laramie, Power Wagon, SLT, ST, SXT, Sport and TRX4 versions, and the 3500 in the Laramie, SLT, ST, SXT, Sport and TRX4 versions.
Key features
- 6-inch long arm design, as the title describes
- PRO-X front and rear shocks, included
- Block and U-bolt rear lift components
- Lift height range of 6 to 7 inches
- It is a stage 2 kit.
Driveline and axle considerations
Raising a heavy-duty Dodge with a long arm kit moves the axle and changes the angles of the driveshafts. Those changed angles put extra load on U-joints and center bearings, so watch for vibration at highway speed, clicking under load or grease leaking from the joints. Catching wear early keeps the driveline smooth and protects the transfer case.
Long arms rely on bushings and mounting points that carry heavy loads through every turn and bump. Inspect them at regular service, and replace any that show cracking or play before they let the axle shift. Shock absorbers also work harder on a lifted truck, so look for leaks, fade on rough roads or uneven wear at the mounts. After a rear block and U-bolt setup, retighten the fasteners after the first drives and check them again at regular intervals.
- Inspect U-joints and center bearing for play
- Check long arm bushings for cracks
- Retorque U-bolts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2074T |
| Suspension type | Lift kit, long arm |
| Lift height | 6 inches, listed range 6–7 inches |
| Lift stage | Stage 2 |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift method | Block and U-bolt |
| Shocks included | Yes |
Vehicle fitment
It fits the 2007–2008 Dodge Ram 2500 and Ram 3500 across the Laramie, SLT, ST, SXT, Sport, Power Wagon and TRX4 trim groups.
It is designed for the 2007–2008 Dodge Ram 2500 and 3500 only, and it is not a fit for the Ram 1500. Verify year, model and trim against the vehicle before ordering.
Installation notes
A long arm kit changes the axle location and the driveline angles on a heavy-duty Dodge, so have the driveline angles and the alignment checked once the lift is in.
What’s included
PRO-X front and rear shocks, the block and U-bolt rear lift components, and the long arm parts that come with this kit.













