Overview
The Pro Comp K4110B is a 4-inch stage 1 coil spring lift with ES3000 front and rear shocks. It fits 1981–1989 Ford F-150 trucks and gives a lift height range of 3 to 4.99 inches.
The front uses coil springs with radius arm brackets and I beam brackets, and the rear is raised with a block and U-bolt kit. A pitman arm corrects the steering, and extended length SS brake lines are included. The shock boots are not included.
Key features
- 4-inch lift, stage 1 design
- Front coil springs with radius arm brackets
- I beam brackets
- Pitman arm steering correction
- Extended length SS brake lines
- Rear block and U-bolt lift
Choosing the right setup
A stage 1 coil spring lift is often the first step for a truck that sees mixed road and trail use. The front springs raise the body, while the radius arm brackets and I beam brackets hold the axle in place so it can travel without binding. Because the rear is lifted with a block and U-bolt arrangement, the rear leaf springs carry the new height, so the rear end usually rides a little differently than the front.
Before buying, think about how the truck will be driven most of the time. Shocks sized for the new height help control the extra travel, and tires that clear the new fender line are often swapped at the same time. Keep the brake hoses and steering linkage in view when you plan the job, since those parts are the ones most often disturbed by a lift like this. Re-check the U-bolts and radius arm hardware after the first short drives.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4110B |
| UPC | 614901125351 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arm and I beam brackets |
| Rear lift | Block and U-bolt kit |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Brake lines | Extended length SS |
| Shock boots | Not included |
Vehicle fitment
It fits 1981–1989 Ford F-150 trucks; Bronco models and other years fall outside that coverage.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arm and I beam brackets change the front geometry, so set the alignment after installation. Check the extended SS brake lines for routing at the new height before the wheels are fitted.
What’s included
The kit includes front coil springs, radius arm brackets, I beam brackets, a pitman arm, extended length SS brake lines, a rear block and U-bolt kit and ES3000 front and rear shocks. Shock boots are not included.









