Overview
The Pro Comp 4 Inch Lift Kit with ES9000 Shocks, part number K1158B, is a 4-inch lift for the 2014-2016 Chevrolet Silverado 1500 and GMC Sierra 1500. The kit is built to work with the factory steel knuckles.
At the rear, the kit uses a block and U-bolt kit with add-a-leaf components, and it includes rear ES9000 shocks. The front shocks are reused from the truck. Brake line extension brackets are included, and shock boots are not included. The lift height range is 3 to 4.99 inches.
Key features
- 4-inch stage 1 lift
- Designed for the factory steel OE knuckles
- Rear block and U-bolt kit with add-a-leafs
- Rear ES9000 shocks
- Front shocks reused from the truck
- Brake line extension brackets
Driveline and alignment after lifting
Raising the rear with blocks and U-bolts changes the angle of the driveshaft, which can cause vibration at highway speed if the angle grows too large. Measuring the driveline after installation shows whether the pinion and transfer case angles still work together. Brake lines and the emergency brake cable may also need attention, since the extended brackets change their routing slightly.
A lift can also change steering and tire clearance, so check for rubbing at full turns and over bumps. Have the alignment set after the install, and look at the steering components for extra travel. Re-check the U-bolts and shock mounts after the first few drives.
- Measure driveline angles after install
- Check brake line routing and length
- Look for tire rub at full lock
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1158B |
| UPC | 70000699338 |
| Lift height | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Knuckle |
| Knuckles | Factory steel |
| Rear lift | Block and U-bolt kit with add-a-leafs |
| Rear shocks | ES9000 |
| Front shocks | Reuse OEM |
| Maximum tire size | 33×12.50 |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2014-2016 Chevrolet Silverado 1500 in the Custom, High Country, LS, LT, LTZ, SSV and WT trims, and the 2014-2016 GMC Sierra 1500 in the Base, Denali, SLE and SLT trims.
Trucks from 2013 and earlier and from 2017 on are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this kit is matched to the factory steel knuckles, confirm the knuckle type on your truck before installing. The rear lift and the 3 to 4.99 inch range will also change driveline angles, so check them after installation.
What’s included
The kit includes a block and U-bolt rear kit with add-a-leafs, brake line extension brackets, and ES9000 rear shocks. Shock boots are not included.






























