Overview
The Pro Comp 2.5″ Lift Kit with VST 2.5″ Coilovers and Shocks, part number K1177BX (EXPK1177BX), is a 2.5 in. suspension lift kit for the 2007-2018 Chevrolet Silverado 1500 and 2007-2018 GMC Sierra 1500. It is Pro Comp’s Explorer Pro low center of gravity system with PRO-VST coilovers and shocks.
The Explorer system is designed to run 35-inch tires while keeping a factory-like ride. It is a bolt-in design with no frame modifications. The Explorer Pro kits replace the factory springs and shocks with PRO-VST coilovers tuned for 17-inch wheels and 35-inch tires.
The kit provides a lift height range of 0-3.5 inches. It also improves travel and rebound, and it corrects suspension geometry for larger wheels and tires.
Key features
- 2.5 in. suspension lift kit
- PRO-VST 2.5″ coilovers and shocks included
- Explorer low center of gravity system
- Bolt-in installation without frame modifications.
- Tuned for 17 inch wheels with 35 inch tires
- Lift height range 0-3.5 Inches
- Direct fit
Checking clearance after a coilover lift
A coilover lift changes the front geometry, so clearance deserves a deliberate check once the truck is back on the ground. Turn the wheels to full lock and watch for contact with the inner fender, the brake hoses and the steering components. Then compress and extend the suspension by hand to confirm that the lines and driveline have room through their full travel.
Taller tires also shift how the truck handles, so the alignment and steering feel should be checked soon after installation. Pay attention to any rubbing or vibration during the first drives. Lifting the front end can load the sway bar links and the lower control arm bushings differently, so inspect those parts during routine service.
- Tire rub at full lock
- Brake hose slack at full droop
- Steering and driveline clearance
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1177BX (EXPK1177BX) |
| Product type | Suspension lift kit with coilovers and shocks |
| Lift | 2.5 in. |
| Shocks series | PRO-VST |
| Shocks included | Yes |
| Tire size | 35″ |
| Lift height range | 0-3.5 Inches |
| Fit type | Direct fit |
Vehicle fitment
The K1177BX fits the 2007-2018 Chevrolet Silverado 1500 (Custom, High Country, Hybrid, LS, LT, LTZ, SSV, WT, XFE) and the 2007-2018 GMC Sierra 1500 (Base, Denali, Hybrid, SL, SLE, SLT, WT, XFE). It also fits the 2007 Silverado 1500 Classic, the 2007 Silverado 1500 HD Classic (LT), the 2007 Sierra 1500 Classic and the 2007 Sierra 1500 HD Classic (SLE, SLT).
Only the Silverado 1500 and Sierra 1500 models above are covered, plus the 2007 Classic models. Match your truck’s year, model and trim to that list before ordering.
Installation notes
A coilover lift reshapes the front end of the truck, so a professional installation is strongly recommended. Support it on rated jack stands over level ground.
- Torque each fastener to the specified value and recheck them after the first few miles.
- Align the wheels after the lift.
- Sweep the suspension through its travel to verify brake line, steering and driveline clearance, and check tire clearance.












