Overview
The Pro Comp 6 Inch Short Arm Lift Kit with ES9000 Shocks, part number K2076B, is a 6-inch coil spring and short arm lift for the 2009-2010 Dodge Ram 2500 and 3500. The front uses coil springs with upper and lower control arms, and a drop pitman arm provides the steering correction. The rear uses lift blocks and U-bolts, and the lift height range is 5 to 6.99 inches.
The kit includes an adjustable front track bar, a front track bar bracket and a transmission drop bracket. ES9000 front shocks are listed, and shocks are included.
Key features
- 6-inch stage 1 short arm lift
- Coil springs with upper and lower control arms
- Drop pitman arm steering correction
- Adjustable front track bar
- Front track bar bracket
- Transmission drop bracket
- ES9000 front shocks, included
Transmission and driveline checks
A transmission drop bracket changes how the transmission sits in the frame, which matters for the driveline. Driveline angles should be checked after installation because a change in height alters the working angle of the driveshaft.
The drop pitman arm steering correction works alongside the adjustable front track bar, and the pair sets the steering geometry at the new height. Confirm the steering centers properly and that the track bar is adjusted during alignment.
Coil springs and upper and lower control arms are the core of the front end and should be inspected at regular service. Rear blocks and U-bolts should be retorqued after initial driving, and the shocks checked for leaks or wear.
- Check driveline angles after install
- Verify transmission mount clearance
- Adjust track bar during alignment
- Retorque rear U-bolts after first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2076B |
| UPC | 70000498091 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Steering correction | Drop pitman arm |
| Rear lift | Blocks and U-bolts |
| Front shocks | ES9000 |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2009-2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT and TRX) and the 2009-2010 Dodge Ram 3500 (Laramie, SLT, ST and SXT). Ram 1500 trucks, the 2011 and later Ram 2500 and 3500, and the 2008 and earlier models are not covered. Match your truck’s year, model and trim to the kit before buying.
Ram 1500 trucks, the 2011 and later Ram 2500 and 3500, and the 2008 and earlier models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The drop pitman arm and the transmission drop bracket are part of the install, and the steering and driveline should be checked after the kit is installed.
What’s included
The kit includes front coil springs, upper and lower control arm components, an adjustable front track bar, a front track bar bracket, a drop pitman arm, a transmission drop bracket, rear blocks with U-bolts, and ES9000 front shocks.









