Overview
The Pro Comp K4119B is a 6-inch Stage II suspension lift kit with ES3000 shocks for the 1981–1989 Ford F-150. It raises the truck with front coil springs and rear block and U-bolt hardware, and it adds front and rear shocks in the same package.
Stage II means the front end is rebuilt around radius arms mounted to I-beam brackets, which locate the axle as the truck is lifted. A Pitman arm corrects the steering geometry, and extended-length stainless steel brake lines are included so the brakes still reach the raised axle. The kit is made for owners of early F-150 trucks who want a 6-inch lift with a complete front and rear setup.
Key features
- 6-inch lift height with front coil springs
- Radius arms and I-beam brackets to locate the front axle
- Pitman arm steering correction for the raised height
- Extended-length stainless steel brake lines
- Rear block and U-bolt kit
- ES3000 front and rear shocks
Before you buy
Stage II radius arm kits change how the front axle is located, so the work reaches well beyond the springs. The radius arms and I-beam brackets set the axle position, which means steering, brake and driveline geometry all need checking together. Many owners set alignment and driveline angles as one job once the kit is in.
Shock length and hardware torque are worth attention too. Drive the truck through its full range before any longer trip, and re-tighten the rear block and U-bolt hardware after the first few drives. Brake hose movement at full droop is also worth a look once the truck has settled.
- Re-torque U-bolt nuts after the first few drives
- Recheck the brake lines at full suspension travel
- Inspect radius arm bushings for play at regular service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4119B |
| UPC | 614901125429 |
| Lift kit stage | Stage II |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Front lift | Coil springs |
| Front control | Radius arms with I-beam brackets |
| Steering correction | Pitman arm |
| Brake lines | Extended length, stainless steel |
| Rear lift | Block and U-bolt kit |
| Shocks | ES3000 front and rear |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1981–1989 Ford F-150 in the Base, Custom, Ranger, XL, XLS, XLT and Lariat versions of those model years.
Trucks from 1980 and earlier, and the 1990 and newer F-150 generations, are outside the listed years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radius arms and I-beam brackets change the front axle location, so have the alignment and driveline angles checked after the install. Lifting this far also means the brake lines have been lengthened to match the new geometry, which should be inspected for clearance at full suspension travel.
What’s included
The kit includes the front coil springs, radius arms and I-beam brackets, Pitman arm steering correction, extended-length stainless steel brake lines, the rear block and U-bolt kit, and ES3000 front and rear shocks.









