Overview
The Pro Comp K4017T is a 4 inch stage 1 lift kit with PRO-X front and rear shocks for the 2000–2005 Ford Excursion. The kit covers a lift range of 4 to 5.5 inches and is a direct-fit kit for the Excursion.
The rear lift uses blocks, or spacers, with u-bolts. Pro Comp says its products are developed by off-road enthusiasts and use racing-influenced engineering, with an emphasis on manufacturing processes and on handling and performance.
For a 2000–2005 Excursion, the kit gives a 4 inch starting point. Stage 1 means it is the first step in the lift range, so the 5.5 inch upper end of the range depends on your setup and the other components you add.
Key features
- 4 inch stage 1 lift
- Lift range of 4 to 5.5 inches
- Rear lift with spacer blocks and u-bolts
- PRO-X shocks included, front and rear
- Direct-fit design for the 2000–2005 Ford Excursion
Block lifts and u-bolt care
Spacer blocks lift the rear by sitting between the axle and the leaf springs, so the axle moves away from the body without changing the spring itself. The u-bolts that clamp the axle take the load, and they stretch and loosen with use. Inspect them for thread damage and rust before the first trip and after every few months of driving.
Block lifts also change the pinion angle, which can cause driveline vibration. Keeping the shocks in good condition matters too, since a rear block lift lengthens the distance the shocks must cover. A torque check on the u-bolts and block fasteners after the first trails is a simple habit that prevents most issues.
- Inspect u-bolt threads and nuts
- Check block faces for cracks
- Recheck torque after the first trails
- Watch for driveshaft vibration
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4017T |
| Suspension type | Lift kit |
| Lift | 4 inches, stage 1 |
| Lift height range | 4 to 5.5 inches |
| Rear lift method | Block/spacer |
| Rear lift component | Block and u-bolt |
| Shocks | PRO-X front and rear, included |
| Fit | Direct fit |
Vehicle fitment
It is for the 2000–2005 Ford Excursion, including Eddie Bauer, Limited, XLS and XLT trims.
It is for the Excursion only; Super Duty trucks and other Ford SUVs are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A lift changes suspension geometry, so have the alignment checked after installation. Raising the rear also changes driveline angles, so check the driveshaft angles and U-joints once the kit is in.
What’s included
PRO-X front and rear shocks, plus the rear block and u-bolt lift components.

















