Overview
The Pro Comp K4107B is a 6-inch stage 2 coil spring lift with ES3000 front and rear shocks. The kit suits 1990–1996 Ford F-150 trucks, and the lift height range is 5 to 6.99 inches.
The front uses coil springs with radius arms and I beam brackets. The rear is raised with a block and U-bolt kit, and a pitman arm corrects the steering. Extended length SS brake lines are included, and the shock boots are not included.
Key features
- 6-inch lift, stage 2
- Front coil springs with radius arms
- I beam brackets
- Pitman arm steering correction
- Extended length SS brake lines
- Rear block and U-bolt lift
Radius arms and I beam brackets
Radius arms paired with I beam brackets form the front link system, so the mounts carry braking forces and the springs control vertical movement. Over time, bushings and bracket welds may need attention, particularly on trucks that see off-road use. Inspect them when the tires are removed and before any long trip.
A block and U-bolt rear lift changes the pinion angle, so the driveshaft should be measured and any vibration investigated quickly. Spacer blocks and U-bolts should be retightened after the first drives. Stage 2 builds also make steering stability more dependent on the pitman arm and drag link condition, so keep those components tight.
Shock boots are not included, so check the ES3000 shocks for leaks and protect the shaft with boots if the truck sees muddy trails.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4107B |
| UPC | 614901125344 |
| Lift | 6 inches, stage 2 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arms and I beam brackets |
| Rear lift | Block and U-bolt kit |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Brake lines | Extended length SS |
| Shock boots | Not included |
Vehicle fitment
It fits 1990–1996 Ford F-150 trucks; Bronco and other years fall outside its fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Radius arms and I beam brackets change the front geometry, so set the alignment after installation. The rear block and U-bolt lift changes the driveline angles, so check those once the truck is on the ground.
What’s included
The kit includes front coil springs, radius arms, I beam brackets, a pitman arm, extended length SS brake lines, a rear block and U-bolt kit and ES3000 front and rear shocks. Shock boots are not included.









