Overview
The Pro Comp K4176B is a 6-inch Stage II lift kit with ES9000 shocks for the 2011–2016 Ford F-250 Super Duty. Its key difference from Stage I is the set of replacement radius arms, which are made of 4130 Chromoly tubing and 3/16 inch thick steel plate.
Specific rate coil springs raise the front, and a drop Pitman arm corrects the steering. The rear is lifted with lift blocks, U-bolts and add-a-leafs. Pro Comp describes these radius arms as adding performance beyond factory ride quality, and a front track bar bracket and sway bar links are included.
Key features
- 6-inch lift height, Stage II
- Replacement radius arms of 4130 Chromoly tubing
- Radius arms made from 3/16 inch thick steel plate
- Specific rate coil springs and spacers
- Drop Pitman arm steering correction
- Lift blocks, U-bolts and add-a-leaf at the rear
Choosing radius arm setup
Radius arms control how the axle locates under the truck, so replacing them changes braking forces, wheel travel and how the front end tracks. Steel arms built from thick plate and chromoly tubing are often chosen for loaded hauling and rough trail use, where flex and load can stress stock brackets. Because the arms and a drop Pitman arm change front geometry, they are commonly replaced together with the coil springs.
Before you install, inspect the existing bushings, shackles and track bar mounts. Look for cracked welds, sagging springs and leaking shocks, since those wear faster once the stance is raised. Plan for an alignment and a driveline angle check afterward, and re-torque all fasteners after the first few drives on rough ground.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4176B |
| UPC | 70000538245 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 2 |
| Suspension type | Radius arm or radius arm brackets |
| Front lift | Specific rate coil springs and spacers |
| Radius arm material | 4130 Chromoly tubing with 3/16 inch thick steel plate |
| Steering correction | Pitman arm |
| Rear lift | Lift blocks, U-bolts and add-a-leaf |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
Vehicle fitment
It fits the 2011–2016 Ford F-250 Super Duty in King Ranch, Lariat, Platinum, XL and XLT versions.
The list is limited to the 2011 through 2016 model years, so the earlier and later Super Duty generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacement radius arms and a drop Pitman arm change the front geometry, so have the alignment and driveline angles checked once the lift is complete.
What’s included
The kit includes replacement radius arms, specific rate coil springs and spacers, the drop Pitman arm, the front track bar bracket, sway bar links, lift blocks, U-bolts and add-a-leafs, and ES9000 front and rear shocks.









