Select your vehicle

Pro Comp 6 Inch Lift Kit with ES3000 Shocks – K5066B

Pro Comp Suspension

Shop Toyota Tacoma Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • The 6-inch Stage 1 kit fits the 2005–2008 Toyota Tacoma Base and Pre Runner.
  • Front crossmembers, compression struts and steering knuckles
  • Front sway bar spacers, bump stop extensions and brake line extension brackets
  • Rear block and U-bolt kit with add-a-leafs; the product name cites ES3000 shocks

Description

Overview

The Pro Comp K5066B is a 6-inch Stage 1 knuckle-type lift kit for the 2005–2008 Toyota Tacoma. The front uses crossmembers, compression struts and steering knuckles, and the rear is lifted with lift blocks, U-bolts and add-a-leafs.

The steering correction uses brake line extension brackets. Front sway bar spacers and bump stop extensions complete the front package. The front shocks are re-used OEM units, so confirm the shock package before ordering.

Key features

  • 6-inch lift height from a Stage 1 kit
  • Front and rear crossmembers
  • Compression struts
  • Steering knuckles for the front end
  • Front sway bar spacers and bump stop extensions
  • Rear block and U-bolt kit with add-a-leafs

Front geometry and alignment

Knuckle-type front lifts move the steering knuckles and control arm mounts, so the front suspension geometry changes in more ways than a simple spring swap. Caster, camber and toe all shift with the new ride height, and steering feel can change slightly. Uneven tire wear is often the first sign of a setup that needs adjustment.

Compression struts and the rear block and add-a-leaf setup are often replaced together when a truck is lifted, because mismatched heights can strain the driveline and axle. Check the pinion angle and driveline angles after installation. Rear U-bolts and block hardware should be retightened after the first few drives.

Watch for signs of a worn front end: clicks or knocks at the knuckles, a pull under braking, or sway bar links that rattle. Inspect boots and joints at every service and replace any part that has play.

  • Alignment after installation
  • Pinion and driveline angle check
  • Brake line length and clearance
  • Retighten U-bolts and block hardware

Specifications

Brand Pro Comp Suspension
Part number K5066B
UPC 614901207330
Lift height 6 inch (lift height range 5 to 6.99 inches)
Lift kit stage Stage 1
Suspension type Knuckle
Front control Front and rear crossmembers, compression struts and steering knuckles
Steering correction Brake line extension brackets
Rear lift Lift blocks and U-bolts with add-a-leafs
Front shocks Re-use OEM

Vehicle fitment

It fits 2005–2008 Toyota Tacoma Base and Pre Runner models.

The list covers the 2005 through 2008 model years only, so the 2004 and earlier Tacomas and the 2009 and newer generations are not included. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Compression struts and the steering knuckles change the front geometry, so have the alignment set and the driveline angles checked after the kit is installed.

What’s included

The kit includes front and rear crossmembers, compression struts, steering knuckles, front sway bar spacers, bump stop extensions, brake line extension brackets, and the rear block and U-bolt kit with add-a-leafs.

SKU: EXPK5066B Category:

Specification

Shipping weight 216.95 lbs
Package dimensions 0.00 × 0.00 × 0.00 in
brands

Fitment

VehicleYearsTrims
Toyota Tacoma2005–2008Base, Pre Runner

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the K5066B fit a 2008 Tacoma Pre Runner?

Yes. The kit fits the 2005 through 2008 Toyota Tacoma in the Base and Pre Runner versions, so a 2008 Pre Runner is inside the covered years.

Which shocks come with the K5066B?

The front shocks are re-used OEM units. Confirm the shock package with the seller before ordering, since the kit name also mentions ES3000 shocks.

Is the steering corrected with a separate part?

Yes. The steering correction uses brake line extension brackets, which are part of the kit alongside the steering knuckles and front crossmembers.

How often should a knuckle lift be re-aligned?

Set alignment right after installation, then check it again after the first few weeks of driving and whenever tire wear looks uneven. Front geometry can drift as new components settle, and worn joints also change alignment readings.

Should the rear be lifted to match the front?

Often yes, because a front-only lift can leave the truck sitting unevenly and change driveline angles. Matching the rear hardware to the front lift keeps ride height balanced, though pinion angle should still be checked after any rear change.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Toyota Tacoma Lift Kits on Amazon