Overview
The Pro Comp 4-inch Stage I Lift Kit with PRO-X Shocks, part number EXPK1020T (kit K1020T), is a stage 1 suspension lift for 1987 to 1992 Chevrolet and GMC trucks and Blazer models. It fits the Chevrolet Blazer, K1500, V10 and V1500 Suburban, along with the GMC Jimmy, K1500 and V1500 versions.
The kit lifts the truck 4 inches at stage 1 and carries a listed lift height range of 4 to 5.5 inches. Pro Comp lists 33 inches as the tire size. The back of the truck is raised with a block or spacer and a block and U-bolt component. ES3000 shocks are listed at the front and the rear, and they are included.
Key features
- 4-inch stage 1 suspension lift
- ES3000 front and rear shocks, included
- Block or spacer rear lift
- Tire size of 33 inches
- Lift height range of 4 to 5.5 inches
Tuning the stance after the lift
A lift changes how the truck sits, so the way it rolls, steers and brakes can feel different on the first few drives. Taller trucks move their center of gravity upward, which makes quick direction changes feel less planted. Tires, shocks and steering components all influence how much of that change is noticeable.
Off-road use puts extra stress on the lift hardware, mounting points and driveline. Brake lines, fuel lines and wiring should be routed with enough slack to handle full suspension travel. A shop can check the setup against the vehicle’s specification and advise on any extra parts that are often replaced during the same job. Keep a record of the torque values used so the fasteners can be checked on a regular schedule.
- Check brake line slack at full travel
- Inspect transfer case mounts after off-road use
- Retorque the hardware after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK1020T |
| Kit code | K1020T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 4 inches stage 1; range 4 to 5.5 inches |
| Tire size | 33 inches |
| Rear lift method | Block or spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1987 to 1991 Chevrolet Blazer, the 1988 to 1992 Chevrolet K1500, the 1987 Chevrolet V10, the 1987 to 1988 and 1989 to 1991 Chevrolet V1500 Suburban, the 1987 to 1991 GMC Jimmy, the 1988 to 1991 GMC K1500, the 1987 GMC V1500 and the 1987 to 1991 GMC V1500 Suburban.
The list does not include 1986 and earlier models or 1992 and later GMC K1500 trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rear block or spacer changes the rear height, so measure front and rear after installation and have the alignment checked.
What’s included
The 4-inch stage 1 lift kit with ES3000 front and rear shocks.













