Overview
The Pro Comp K4053B is a 4-inch stage 1 coil spring lift with ES3000 front and rear shocks. The front uses coil springs with radius arm brackets, and the rear is lifted with add-a-leafs. The lift height range is 3 to 4.99 inches.
Bump stop extensions and a pitman arm for steering correction are included, along with extended length brake lines. Shock boots are not included.
Key features
- 4-inch lift, stage 1
- Front coil springs with radius arm brackets
- Rear add-a-leaf lift
- Bump stop extensions
- Pitman arm steering correction
- Extended length brake lines
Radius arm and spring setup
Radius arm brackets control how the axle moves fore and aft as the suspension cycles. When a coil spring lift is paired with radius arms, the axle pivot point moves, which changes pinion angle and the ride feel on rough roads. Inspect the brackets and the bushings where the arms attach to the frame, and tighten all fasteners with a calibrated torque wrench after the first drives.
Add-a-leaf rear lifts add leaves to the existing pack, which raises the rear without changing the spring rate much. Over time the added leaves can settle, so check rear height and the clamp bolts after the first trips. Worn shocks or sagging springs can also cause a stiff or uneven ride, and rear shocks are often replaced at the same time.
- Inspect radius arm bushings for cracks
- Check add-a-leaf clamp bolts after the first drives
- Replace worn shocks when the suspension is raised
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4053B |
| UPC | 614901125023 |
| Lift | 4 inches, stage 1 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm |
| Front lift | Coil springs with radius arm brackets |
| Rear lift | Add-a-leafs |
| Steering correction | Pitman arm |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Check the axle and spring layout on your truck before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Add-a-leafs raise the rear by adding leaves to the springs, so the rear driveline angles should be checked after installation. The extended brake lines need to be routed without strain at the new height.
What’s included
The kit includes front coil springs, radius arm brackets, bump stop extensions, a pitman arm, extended length brake lines, the rear add-a-leaf lift and ES3000 front and rear shocks.









