Overview
The Pro Comp 6 Inch Lift Kit with Front MX2.75 Coilovers and Rear Pro Runner Shocks, part number K2084BPX, is a 6-inch knuckle lift. It is a stage 1 kit with a lift height range of 5 to 6.99 inches.
Pro Comp describes CNC machined knuckles and redesigned crossmembers for this platform, which it says improve geometry for minimal toe change during suspension travel. The front uses MX2.75 coilover shocks, and the rear uses Pro Runner shocks. The kit is finished in black and is listed with stainless steel braided brake lines.
Key features
- 6-inch stage 1 knuckle lift
- MX2.75 front coilover shocks
- Rear Pro Runner shocks
- CNC machined knuckles
- Redesigned crossmembers
- Crossmember drop brackets
- Extended sway bar links and driveline spacer
- Stainless steel braided brake lines
Before you install
A knuckle lift changes how the front wheels pivot, so the steering geometry is different after installation. Replacement knuckles and crossmembers work together with the coilover shocks, which means the front end should be treated as one system during setup. Take time to inspect the new brackets, bolts and brake lines before the first drive, and retorque fasteners after the first few trail runs.
Gear and driveline changes often follow a lift this size. Check the driveline angles and the sway bar links once the truck is back on its wheels, and look for rubbing at full compression or full droop. Shock and bushing wear shows up as clunking over bumps or uneven tire wear, so inspect them at regular service intervals.
- Check brake line routing at full steering lock
- Recheck torque on knuckle and crossmember bolts after initial use
- Inspect coilover mounts for play each season
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2084BPX |
| UPC | 70000676697 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Steering correction | Knuckles |
| Rear lift | Spacers |
| Front shocks | MX2.75 coilover |
| Rear shocks | Pro Runner |
| Finish | Black |
| Drivetrain | 4WD |
Vehicle fitment
It fits 2012 and 2013 Ram 1500 trucks with 4WD. Make sure your year, model and trim match before you order.
It is designed for 4WD Ram 1500 trucks from 2012 and 2013. Check your year, model and trim before buying.
Installation notes
The MX2.75 coilovers and new knuckles change front geometry, so have the alignment and driveline angles checked after installation.
What’s included
The kit includes CNC machined knuckles, redesigned crossmembers, crossmember drop brackets, extended sway bar links, a driveline spacer, stainless steel braided brake lines, MX2.75 front coilover shocks, and rear Pro Runner shocks.
































