Overview
The Pro Comp K4137B is a 6-inch lift kit for the 2004–2008 Ford F-150 and the 2004 F-150 Heritage. It is built around front crossmembers, compression struts and spindles, and it corrects steering with a drop centerlink and steering drop.
The front crossmembers and spindles set the new front height, and the compression struts are part of the front control arrangement. Front sway bar spacers keep the bar working at the new height, and brake line extension brackets allow the brake hoses to reach the raised components. The rear uses a block and U-bolt kit.
Key features
- 6-inch lift height
- Front and rear crossmembers
- Compression struts
- Spindles for the front end
- Steering drop and centerlink correction
- Front sway bar spacers and brake line extension brackets
Front end and driveline checks
Crossmembers and spindles change the front geometry at the same time as the ride height. Caster and camber can move, and the steering can pull or wander until the alignment is reset, so plan a shop visit before the first long drive. A steering drop and centerlink help hold the steering geometry, but they still need checking for play during the first few weeks of driving.
The compression struts control the front arm angles, so bushings and mounting bolts should be inspected whenever the front end is serviced. Sway bar spacers change how the bar loads at the new height, and the links may need attention if the bar starts to knock. Brake line extension brackets keep hoses from stretching too far, so look for kinks or rubbing at full travel.
The rear block and U-bolt kit raises the back of the truck, which changes driveline angles. Check U-joints for vibration, clicks on turns or grease leaks, and look at the pinion angle on a shop lift. Replacing worn joints while the driveline is out is a common, practical choice for a lifted F-150.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K4137B |
| UPC | 614901125542 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Knuckle |
| Front control | Crossmembers, compression struts and spindles |
| Steering correction | Steering drop and centerlink |
| Rear lift | Block and U-bolt kit |
| Front shocks | Re-use OEM (the product name cites ES3000 shocks) |
Vehicle fitment
This kit fits the 2004–2008 Ford F-150, including the FX4, Lariat, STX, XL and XLT versions, and the 2004 F-150 Heritage in XL and XLT versions.
The list covers the 2004 through 2008 model years only, so the 2009 and newer F-150 generation is not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The front crossmembers and spindles change the suspension geometry, so have the alignment checked after installation. Confirm the brake lines have enough length for full travel once the new brackets are installed.
What’s included
The kit includes front and rear crossmembers, compression struts, spindles, front sway bar spacers, the steering drop and centerlink, brake line extension brackets, and the rear block and U-bolt kit.
Not included: The front shocks are re-used OEM units, so the ES3000 front shock named in the product name is not part of this kit.









