Overview
The Pro Comp 2-inch Lift Kit with PRO-M Shocks, part number EXPK2002M (kit K2002M), is a low center-of-gravity suspension lift for the 2014 to 2026 Ram 2500. It is designed for 37-inch tires.
The kit is part of the Explorer line, a way for late-model truck owners to run larger tires while keeping the factory ride. The 2-inch lift adds ground clearance, suspension travel and a more aggressive stance.
The shocks are PRO-M units at the front and the rear. Pro Comp describes them as monotube shocks that deliver quick response and steady damping without fading or leaking. Pro Comp designed the Explorer kits to fit mid-size trucks, half-ton trucks and three-quarter-ton trucks, which covers the Ram 2500 heavy-duty class.
The kit installs with bolt-in parts and needs no frame modifications. The factory components stay in use, which helps keep the ride close to the factory setting.
Key features
- 2-inch suspension lift
- PRO-M shocks at the front and rear
- Designed for 37-inch tires
- Low center-of-gravity design.
- Bolt-in parts with no frame modifications.
Heavy-duty lift considerations
A 2-inch lift on a heavy-duty Ram changes the weight distribution and the angle of the driveline. The axles may no longer sit square to the transfer case, which can cause vibration at highway speed. Check the driveline angles after installation and watch for vibration when accelerating or cruising.
Heavier loads put more stress on shocks and suspension components, so a truck used for towing or hauling may wear parts faster after a lift. Check the shock mounts, bushings and steering linkage periodically, especially after a season of rough trail use. Keep the tires inflated to their load rating, since heavy trucks rely on proper pressure for stability.
- Inspect driveline U-joints after the first few drives
- Check front alignment once the kit is installed
- Re-torque shock and control arm fasteners periodically
- Compare tire load ratings before choosing a size
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK2002M |
| Kit code | K2002M |
| Suspension type | Lift kit |
| Lift height | 2 inches |
| Tire size | 37 inches |
| Shocks included | Yes |
| Front shocks | PRO-M |
| Rear shocks | PRO-M |
| Fit type | Direct fit |
Vehicle fitment
The kit is made for the 2014 to 2026 Ram 2500, across its Big Horn, Laramie, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman versions.
It fits Ram 2500 pickups only, not the Ram 1500 or Ram 3500. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With the Ram raised 2 inches, the driveline angles and front alignment will differ from the factory setting, so have the truck aligned and the driveline checked after installation.
What’s included
The 2-inch lift kit with front and rear PRO-M shocks.











