Overview
The Pro Comp 6 Inch Lift Kit with ES9000 Shocks, part number K2081B, is a 6-inch coil spring and short arm lift for the 2009-2010 and 2011-2013 Dodge Ram 2500 and 3500. It is a direct-fit kit with a lift height range of 5 to 6.99 inches, and the kit is black.
The front uses coil springs with control arms, and the kit includes a track bar, sway bar links, a pitman arm and U-bolts. The rear uses lift blocks and U-bolts. ES9000 shocks are fitted at both the front and the rear, and shocks are included. Wheels should be 17-inch or larger with a 4.625-inch backspace.
Key features
- 6-inch stage 1 lift
- Coil springs with control arms
- Track bar and sway bar links
- Pitman arm steering correction
- Rear lift blocks with U-bolts
- ES9000 front and rear shocks, included
- Black finish
Before you buy
Control arm kits change the way the front axle is located, so the bushings and mounts see different loads than the stock setup. Inspect the new hardware after the first few drives, and check that the track bar clears the frame and steering components at full travel.
Wheel fitment is a common reason for rubbing. The required wheel size and backspace should match the wheels you plan to run, and tire width should be checked against the fender liners and body at full compression. Trimming liners or adding spacers should be a last step, not the first.
- Torque the track bar and control arm fasteners after the first drive
- Check pitman arm centering before the alignment
- Confirm the sway bar links move freely
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2081B |
| UPC | 70000536609 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Coil spring and short arm |
| Rear lift | Lift blocks and U-bolts |
| Shocks | ES9000, front and rear |
| Wheel requirement | 17-inch or larger with 4.625-inch backspace |
| Finish | Black |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2009-2010 Dodge Ram 2500 (Laramie, SLT, ST, SXT and TRX), the 2009 Dodge Ram 3500 (Laramie, SLT, ST and SXT), the 2011-2013 Ram 2500 and the 2011-2013 Ram 3500, across the trims shown here.
Ram 1500 trucks and Ram 2500 and 3500 model years outside 2009-2013 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The track bar, pitman arm and control arm components change steering and suspension geometry, so have the alignment and steering checked after installation. Pro Comp’s wheel requirement should be checked against the wheels you plan to run.
What’s included
The kit includes front coil springs, control arms, a track bar, sway bar links, a pitman arm, U-bolts, rear lift blocks, and ES9000 front and rear shocks.









