Overview
The Pro Comp EXPK2187T, also written K2187T, is a 6.0-inch Stage 2 radius arm lift kit with PRO-X shocks for the 2013–2018 Ram 3500. It is a direct fit, with a block and U-bolt at the rear.
Stage 2 means this is the second-level radius arm system in the 6-inch range, and it is designed to take the axle’s front-to-back control at the new height. The arms, cross members and knuckles are the main structural parts of the kit.
PRO-X shocks are fitted at both ends, along with a block and U-bolt at the rear. The cast and CNC-machined knuckles and the laser-cut, CNC-formed cross members form the base of the system, with brake line extensions, longer bump stops and sway bar drop brackets included.
Key features
- 6.0-inch Stage 2 radius arm lift with a 6–7 inch lift height range
- Cast and CNC-machined knuckles
- Laser-cut, CNC-formed and robotically welded cross members
- Brake line extensions, longer bump stops and sway bar drop brackets
- PRO-X front and rear shocks, included
Stage 2 system upkeep
A Stage 2 radius arm system is a larger change than a basic spacer lift, so its parts see more load and more articulation. The knuckles and cross members set the foundation, and their welds, bolts and bushings are the places to inspect first when the truck is serviced.
Consider the steering and braking side as well. Brake lines and their extensions should be checked for chafing at every wheel service, and the steering components need a look for play. When the axle is moved, a full alignment and a check of the driveline keep wear even. Replace worn bushings early rather than letting one part wear the others.
Track the service intervals in a notebook, and note any change in steering feel, noise or tire wear as soon as it appears so the cause can be found quickly.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK2187T (K2187T) |
| Kit type | Radius arm lift kit |
| Kit stage | Stage 2 |
| Lift height | 6 inches, with a lift height range of 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X |
| Rear lift method | Block and spacer |
| Rear lift component | Block and U-bolt |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
The kit fits the 2013–2018 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims.
The Ram 2500 and the 2019 and newer Ram 3500 are outside this fit. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Radius arm lifts change the axle’s location and the pinion angle, so an alignment and a driveline check are needed after the install.
What’s included
PRO-X shocks at both ends, the radius arm system, brake line extensions and sway bar drop brackets are included. Check the package contents against your installation before starting.













