Overview
The Pro Comp 6 Inch Lift Kit with Pro Runner Shocks, part number K2062BPS, is a 6-inch knuckle lift for the 2006-2008 Dodge Ram 1500. It uses Pro Runner SS front shocks and has a lift height range of 5 to 6.99 inches.
The front lift uses spindles and knuckles, along with front and rear crossmembers and compression struts. Front sway bar spacers and bump stop extensions are part of the kit. Steering correction is not needed, and the rear uses lift blocks and U-bolts.
Key features
- 6-inch stage 1 knuckle lift
- Pro Runner SS front shocks
- Front spindles and knuckles
- Front and rear crossmembers
- Compression struts
- Front sway bar spacers and bump stop extensions
- Extended-length brake lines
Shock setup and daily driving
Shock valving affects how a lifted truck feels over washboard, rough trails and highway expansion joints. Heavier-duty shock units can keep the body steadier when the truck is loaded, but they also pass more impact to the frame and mounts, so the choice should match how the truck is used. Think about trail use, towing and daily commuting before settling on a setup.
Shocks should be checked for leaks at the body and rod ends after each season of hard use. Upper mounts and lower eyes wear over time, so inspect rubber bushings for cracking and replace them when they show play. If the truck sees off-road use, keep spare hardware on hand for the upper mount.
- Check shock bodies for oil residue
- Inspect upper and lower shock mounts for play
- Replace worn bushings before they fail
- Match shock length to the lift and travel you use
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2062BPS |
| UPC | 70000638099 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Rear lift | Lift blocks and U-bolts |
| Front shocks | Pro Runner SS |
| Steering correction | Not needed |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for the 2006-2008 Dodge Ram 1500 in the Laramie, SLT, SRT-10, ST, SXT, Sport and TRX4 versions.
Ram 2500 and 3500 trucks and Ram 1500 models from other years are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The knuckle and spindle replacement changes front geometry, so have the alignment checked after installation.
What’s included
The kit includes front spindles and knuckles, front and rear crossmembers, compression struts, front sway bar spacers, bump stop extensions, extended-length brake lines, Pro Runner SS front shocks, and rear lift blocks with U-bolts.









