Overview
The Pro Comp K2081T is a 6-inch stage 1 suspension lift with PRO-X front and rear shocks for the 2009–2010 Dodge Ram 2500 and Ram 3500 and the 2011–2013 Ram 2500 and Ram 3500. The listed lift height range is 6 to 7 inches, and both shocks come with the kit.
The rear is lifted with a block and spacer method using block and U-bolt components. The listed fitment covers the 2500 and 3500 heavy-duty models only, so Ram 1500 pickups are not covered.
Key features
- 6-inch stage 1 lift with a listed range of 6 to 7 inches
- PRO-X front shocks and PRO-X rear shocks, both included
- Block/spacer rear lift method with block and U-bolt components
- Covers 2009–2010 and 2011–2013 Ram 2500 and 3500 pickups
Driveline and alignment after lifting
Raising a heavy-duty pickup changes the angles that the driveshafts and front axle depend on. Larger joint angles can cause vibration, faster u-joint wear and a harsh ride, so the driveline should be inspected soon after the new height is set. Block and spacer rear systems also move the axle relative to the leaf springs, which places more load on the U-bolts and any spring hardware.
Front geometry usually needs attention too. Taller components shift caster, camber and toe, and uneven tire wear often shows up quickly when alignment is skipped. Heavy trucks that tow or haul load put extra strain on shocks and fasteners, so retorque hardware and check shock mounts during routine service.
- Inspect u-joints and slip yokes for play
- Re-torque U-bolt nuts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2081T |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift method | Block/spacer with block and U-bolt |
| Shocks included | Yes |
Vehicle fitment
It fits the 2009–2010 and 2011–2013 Dodge Ram 2500 and Ram 3500 pickups in the Laramie, Power Wagon, SLT, ST, SXT, TRX, Big Horn, Lone Star, Outdoorsman and Tradesman configurations.
Ram 1500 pickups are outside this kit’s coverage, which is limited to the 2500 and 3500 heavy-duty models. Verify your truck’s year, model and trim before ordering.
Installation notes
Raising a heavy-duty Ram changes the driveline angles, so have the driveline angles and front alignment checked once the lift is in.
What’s included
PRO-X front shocks, PRO-X rear shocks, and the block and U-bolt rear lift components.













