Overview
The Pro Comp 6 Inch Lift Kit with Front MX2.75 Coilovers and Pro Runner Shocks, part number K1143BPX, is a 6-inch stage 2 knuckle lift. The front uses MX2.75 coilover shocks, with front and rear crossmembers, compression struts, spindles and sway bar drop brackets.
The rear uses a block, U-bolt and add-a-leaf kit. The front shocks are MX2.75 coilovers, and the lift height range is 5 to 6.99 inches. Brake line extension brackets are included.
Key features
- 6-inch stage 2 knuckle lift
- MX2.75 front coilover shocks
- Front and rear crossmembers
- Compression struts and spindles
- Sway bar drop brackets and bump stops
- Rear block, U-bolt and add-a-leaf kit
- Brake line extension brackets
Coilover front tuning
Coilover shocks combine a spring and damper into one unit, so spring preload and front ride height can be adjusted. Changing preload alters the front height and can shift the alignment, so the front should be checked after each adjustment. Knuckle lifts with coilovers also change steering geometry, which makes an alignment part of the install.
Crossmembers and compression struts carry the front load at the new height, so their mounting bolts should be inspected after the first drives. Rear add-a-leaf blocks work with the leaf pack to support the new height. Brake line extension brackets protect the hoses, and the lines should be checked for rubbing at full travel.
- Recheck coilover preload after adjustments
- Inspect crossmember bolts after the first drives
- Check brake lines for rubbing at full travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1143BPX |
| UPC | 70000637808 |
| Lift height | 6 inches, stage 2 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Front shocks | MX2.75 coilover |
| Rear lift | Block, U-bolts and add-a-leaf |
| Shocks included | Yes |
| Fitment | Direct fit |
Vehicle fitment
Confirm fit for your truck’s year, model and trim before ordering, then match the coilover mounts to the front crossmember.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilover front shocks and a knuckle lift change front geometry, so have the alignment and driveline angles checked after installation.
What’s included
The kit includes MX2.75 front coilover shocks, front and rear crossmembers, compression struts, spindles, sway bar drop brackets, bump stops, brake line extension brackets, and a rear block, U-bolt and add-a-leaf kit.
















