Overview
The Pro Comp PCW51-6873 is a 16×8 steel wheel from the Pro Comp 51 Series, a windowed Rock Crawler design with a 5 on 5 bolt pattern and a gloss black finish. It is sold as a single wheel, without the center cap or lug nuts.
The Rock Crawler wheels are steel with a powder-coated finish. At 16 inches in diameter and 8 inches wide, the rim takes a 16-inch tire sized for an 8-inch-wide rim. The Rock Crawler name points to trail use, and this model is a universal fit wheel rather than one built for a named vehicle.
Key features
- Steel construction with a windowed face style
- 16-inch diameter and 8-inch width
- 5 on 5 bolt pattern with a center bore of 83
- Offset -6 and backspacing 4.25
- Gloss black finish from the 51 Series range
- Powder-coated steel construction
Choosing a setup for this wheel
Negative offset and short backspacing change where the tire sits, which matters more than rim diameter on a trail rig. Measure the space between the back of the wheel and the brake parts, then compare that with the tire you plan to run. A tire that fits on paper may still rub when the suspension compresses.
Spacers are often used to fix fitment, but they also move the wheel bearing load outward and shift the tire further from the fender. If you change tire width, recheck steering arm and tie rod clearance. Mark which wheel went on which corner so balance and wear stay consistent.
- Check inner fender clearance at full compression
- Compare tire width to rim width
- Mark wheel position when rotating
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW51-6873 |
| Series | 51 Series |
| Style | Windowed |
| Construction | Steel |
| Finish | Gloss black |
| Diameter | 16 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.25 |
Vehicle fitment
This wheel is a universal fit wheel and is not tied to one model. Whether it mounts and clears depends on the 5 on 5 bolt pattern, the 83 center bore, the -6 offset and the 4.25 backspacing, so compare those against your hub and fender clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Bolt-on mounting needs a matching 5-lug hub, and the center bore should be checked against the hub so the wheel seats correctly. A negative offset moves the tire outward, so test-fit the wheel with its tire at the inner fender and the brake caliper before a trail trip.
What’s included
One 16×8 wheel. The center cap and lug nuts are sold separately and are not included.









