Overview
The Pro Comp 97 Series Rock Crawler in 17×9 inches is a flat black steel wheel, part number PCW97-7973F, with a 5 on 5 bolt pattern. It is a 17 inch steel wheel from Pro Comp Steel Wheels’ Rock Crawler Series 97, designed for off-road vehicles that need a durable rim and a powder coat that holds up to trail use.
The -6 offset moves the mounting face slightly behind the centerline and the wheel slightly outward. The 4.25 backspacing runs from the mounting face to the back edge of the rim. The 83 bore is the hub opening that does the centering. The wheel is steel with a flat black powder coat.
Key features
- Steel construction with a flat black powder coat
- 17 inch diameter and 9 inch width
- 5 on 5 bolt pattern
- 83 center bore
- -6 offset and 4.25 backspacing
- Holes-style face from the 97 Series
Bead seats and lug seats
A wider rim on a 17 inch wheel changes how the tire seats and how it flexes on rock. The bead seat must be clean and undamaged, because a dent or rust ring at the seat is a common cause of air loss and slow leaks. When mounting, lubricate the bead lightly with a tire-approved product and inflate in steps so the bead seats evenly around the rim.
Tire choice goes hand in hand with a wide steel rim. A taller tire can improve sidewall cushioning on rocks, but it also adds rotating weight and can rub at full articulation. A shorter, stiffer tire puts more load into the rim edge on sharp impacts, so many trail builders pair a wide wheel with a tire rated for the weight of the vehicle.
Routine inspection keeps the setup safe. After each off-road outing, look at the rim lip and the bead area for bends or cracks, and check the bolt holes for elongation. Tighten the lug nuts to the vehicle’s specified torque after the first drives. Keep the flat black coat touched up where stone chips expose bare steel.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW97-7973F |
| Series | 97 Series Rock Crawler |
| Construction | Steel |
| Style | Holes |
| Finish | Flat black powder coat (the spec sheet says black) |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.25 |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. The 5 on 5 bolt pattern and 83 center bore set the hub match, and the -6 offset with a 9 inch rim sets how far the tire sits outward. Measure clearance on the vehicle itself before trail use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 9 inch rim on a 17 inch diameter leaves little room between the tire and the fender at full articulation, so test the setup with the intended tire before trail use. Check the lug nut seats for burrs before mounting.
What’s included
This order covers the 17×9 wheel by itself, PCW97-7973F, without a center cap.
Not included: Center cap and lug nuts for part PCW97-7973F, which are sold separately.











