Overview
The Pro Comp Series 252 Street Lock in 15×10 inches is a windowed steel wheel in gloss black, part number PCW252-5183, with a 6 on 5.5 bolt pattern. Pro Comp Steel Wheels offers the 252 line in several sizes and backspacings, and this 15 inch wide version suits off-road trucks and SUVs that need a durable steel rim.
The -44 offset places the mounting face behind the centerline, so the wheel is positioned farther outward on the hub. The 3.75 backspacing describes how far the rim’s back edge reaches behind the mounting face. The 108 center bore is the opening that centers the wheel on the hub.
Key features
- Windowed steel design with a gloss black powder coat
- 15 inch diameter and 10 inch width
- 6 on 5.5 bolt pattern
- 108 center bore
- -44 offset and 3.75 backspacing
- Part of the Series 252 Street Lock line
Mounting a 6 on 5.5 wheel
A six lug wheel distributes clamp load across more studs, so torque and stud condition matter as much as the wheel itself. Start each lug nut by hand to avoid cross threading, then tighten in a star pattern in stages. Look at the studs for thread damage or rust before each mount, and replace any that look stretched.
Hub-centric fit matters on a wheel with a 108 bore, because the bore should seat on the hub rather than carry the load through the lugs alone. A ring can close a gap where the hub is smaller, and it should be sized to fit snugly. Check the centering after mounting and before the first trip, since a loose fit can cause vibration.
Specifications
| Brand | Pro Comp Steel Wheels |
|---|---|
| Part number | PCW252-5183 |
| Series | 252 Series Street Lock |
| Construction | Steel |
| Style | Windowed |
| Finish | Gloss black powder coat (the spec sheet says black) |
| Diameter | 15 inches |
| Width | 10 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -44 |
| Backspacing | 3.75 |
Vehicle fitment
Fit depends on the year, model and trim, so confirm those before ordering. A 6 on 5.5 bolt pattern and 108 center bore must match the hub exactly. Check the -44 offset against the fender, steering and brake caliper on the vehicle you choose.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the wheel on the hub with the lug nuts started by hand, then tighten in a star pattern. A -44 offset wheel should be road tested slowly after mounting to confirm the tire is not rubbing.
What’s included
The 15×10 wheel (PCW252-5183) is sold alone, and the center cap and lug nuts are a separate purchase.
Not included: Center cap and lug nuts for part PCW252-5183, which are sold separately.











